Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
SPC 4WD & RWD Camber / Caster Sleeve 0.00° (0°)
Part #: 23139
$32.12
$29.55
For each
For each
Free Shipping! *to continental U.S. only
Featured Videos
-
Video Description:Product Installation Video
-
Video Description:Check out this episode of Andy's Auto Sport TV where we explain what you need to know about camber kits! We explain what positive and negative camber are and we talk about why you might want to buy a camber kit to avoid either one. We also explain the different types of camber kits that exist, including camber bolts, camber arms, and control arms.
Fits On:
00-05 Excursion 4WD, 92-98 F350 Crew Cab 4WD, 94-99 Ram 2500HD, 3500 4WD, 94-99 Ram 3500 RWD w/ Mono Beam, 99-04 F250 RWD/4WD ... See more
Description:
Change camber, caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero degree sleeve 23109 or 23139 or to determine the change needed, then install the correct sleeve. To adjust, the sleeve may be lifted and rotated 1/8 turn.
-Installation time: .5 hr/side
-Required: 1 per wheel
-Recommended Tools: 77880 - Sleeve Puller, 88830 - Sleeve Puller
Change camber, caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Install zero degree sleeve 23109 or 23139 or to determine the change needed, then install the correct sleeve. To adjust, the sleeve may be lifted and rotated 1/8 turn.
-Installation time: .5 hr/side
-Required: 1 per wheel
-Recommended Tools: 77880 - Sleeve Puller, 88830 - Sleeve Puller
Specialty Products Company (SPC) has been in the alignment business since 1972. They focus on creating innovative suspension and alignment products and tools to suit the needs of a wide range of applications from OEM street cars to full race cars. SPC offers three separate product lines that cover performance off-road, OEM vehicles and heavy duty trucks, and hotrod/race suspensions. Based in Longmont, Colorado, SPC offers fantastic technical support both over the phone and online. Their customer service is also top-notch with a knowledgeable staff on hand to ensure you get the product you need. They are also an ISO/TS 16949 company, which is an international automotive quality standard that is used throughout the industry. With high-quality components they are a go-to company for all of your suspension and alignment needs.
Featured Videos
-
Video Description:Product Installation Video
-
Video Description:Check out this episode of Andy's Auto Sport TV where we explain what you need to know about camber kits! We explain what positive and negative camber are and we talk about why you might want to buy a camber kit to avoid either one. We also explain the different types of camber kits that exist, including camber bolts, camber arms, and control arms.
Q: What do camber kits do? Why buy camber kits?
A: Any amount of ride height change will cause the camber of your tires to change. This means that instead of the tires being perfectly perpendicular to the grant, they will be slight slanted, inward in the case of negative camber, outward in the case of positive camber. It might not always be visible, but having your camber out of adjustment will cause the tire to run on the inside or outside edge only since the tires will be slanted relative to the ground. The lower you go the more negative camber you will get and the faster the tire will wear. There are different camber kits available to combat this problem; the correct kit is determined by how much your camber is away from the factory recommended specification.
Q: Do camber kits come in sets of 4?
A: No, unless otherwise noted, camber kits are sold in sets of 2, so you buy one set for the front and/or one set for the rear.
Q: How do you install camber kits?
A: Depending on the car you drive, camber kits are comprised differently. Contact us for installation details, or simply have it installed by professionals.
A: Any amount of ride height change will cause the camber of your tires to change. This means that instead of the tires being perfectly perpendicular to the grant, they will be slight slanted, inward in the case of negative camber, outward in the case of positive camber. It might not always be visible, but having your camber out of adjustment will cause the tire to run on the inside or outside edge only since the tires will be slanted relative to the ground. The lower you go the more negative camber you will get and the faster the tire will wear. There are different camber kits available to combat this problem; the correct kit is determined by how much your camber is away from the factory recommended specification.
Q: Do camber kits come in sets of 4?
A: No, unless otherwise noted, camber kits are sold in sets of 2, so you buy one set for the front and/or one set for the rear.
Q: How do you install camber kits?
A: Depending on the car you drive, camber kits are comprised differently. Contact us for installation details, or simply have it installed by professionals.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
6x Front Upper Rear Camber Kit + Lower Control arms For 1996-2000 Honda Civic
Truhart Rear Camber Kits For 88-00 Civic 90-01 Integra 97-01 CRV TH-H201
6 Pcs Rear Upper & Lower Control Toe Camber Arms for Honda Accord 2003 - 2007
16mm Adjustable Camber Correction Alignment Kit FIT FRONT Wheels Cam Bolts 2Kits
6pcs Rear Camber&Toe Adjustable Arms For Honda Accord、Crosstour&Acura TL、TSX、TLX
