1-800-419-1152
Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Wilwood WIL Rotors - Rotor-UL32 Vented Iron-Drilled 11.75 X 1.25 - 8 On 7.00in
Part #: 160-5864
$83.36 For each
Fits On:
Universal
Description:
Wilwood's UL32 Vented Iron drilled rotor measures 11.75 x 1.25 inches with an 8 on 7.00in bolt pattern, designed to balance low rotating weight with effective heat management. The drilled iron construction suits sprint cars, late models, modifieds, and similar competition applications running in low to medium temperature ranges.
Wilwood's UL32 Vented Iron drilled rotor measures 11.75 x 1.25 inches with an 8 on 7.00in bolt pattern, designed to balance low rotating weight with effective heat management. The drilled iron construction suits sprint cars, late models, modifieds, and similar competition applications running in low to medium temperature ranges.
Q: Do rotors come in sets of 4?
A: Rotors are sold individually, per side, unless otherwise noted on our website. Rotors should normally be replaced in sets of two; you should buy 2 rotors for the front, or 2 rotors for the rear, or all 4 at once.
Q: What are brake rotors?
A: Rotors are the flat disk-like plates that provide friction for the brake pads to slow down your car. Some rotors have cooling fins between both faces are called "vented" rotors, or drilled which are called "cross-drilled" rotors. Replacing your factory rotors with aftermarket rotors will improve your braking power, which can be a high priority if you add performance parts to your car. You don't want to beef up the performance of your car without also improving your stopping power.
Q: How do you install rotors?
A: Rotors are installed by removing the entire brake assembly and caliper. Once removed, the factory rotor is taken off and the aftermarket rotor is installed. Everything is re-installed back together. Installing new brake pads is usually done at the same time rotors are being replaced.
A: Rotors are sold individually, per side, unless otherwise noted on our website. Rotors should normally be replaced in sets of two; you should buy 2 rotors for the front, or 2 rotors for the rear, or all 4 at once.
Q: What are brake rotors?
A: Rotors are the flat disk-like plates that provide friction for the brake pads to slow down your car. Some rotors have cooling fins between both faces are called "vented" rotors, or drilled which are called "cross-drilled" rotors. Replacing your factory rotors with aftermarket rotors will improve your braking power, which can be a high priority if you add performance parts to your car. You don't want to beef up the performance of your car without also improving your stopping power.
Q: How do you install rotors?
A: Rotors are installed by removing the entire brake assembly and caliper. Once removed, the factory rotor is taken off and the aftermarket rotor is installed. Everything is re-installed back together. Installing new brake pads is usually done at the same time rotors are being replaced.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
Front Rear Drilled Rotors Ceramic Brake Pads for Toyota Camry Avalon Lexus ES350
12.01" Front Drilled Brake Rotors for Chevrolet Trailblazer 2002 2003 2004 2005
Front Drilled Slotted Disc Rotors Brake Ceramic Pads For 2011 2012 Honda Accord
10.83" Front and Rear Drilled Rotors Brake Pads For Toyota Matrix 2010 2011 1.8L
12.01" Front Drilled Brake Rotors for Chevrolet Trailblazer 2002 2003 2004 2005
© 1997- Andy's Auto Sport | All Rights Reserved.