1-800-419-1152
Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Wilwood WIL Rotors - Rotor-HD48-LW SPC-37-LH 11.75 X 1.21 - 8 On 7.00in
Part #: 160-13498
$125.76 For each
Fits On:
Universal
Description:
Wilwood's HD 48 Curved Vane Spec-37 rotor measures 11.75 x 1.21 inches with an 8 on 7.00in bolt pattern and is cast from a proprietary iron alloy derived from Wilwood's military-spec rotor development. The alloy is engineered for extreme temperature resistance against distortion, warping, cracking, and wear. HD Series prep includes full detail machining and smooth pad contact faces without slots.
Wilwood's HD 48 Curved Vane Spec-37 rotor measures 11.75 x 1.21 inches with an 8 on 7.00in bolt pattern and is cast from a proprietary iron alloy derived from Wilwood's military-spec rotor development. The alloy is engineered for extreme temperature resistance against distortion, warping, cracking, and wear. HD Series prep includes full detail machining and smooth pad contact faces without slots.
Q: How do you install rotors?
A: Rotors are installed by removing the entire brake assembly and caliper. Once removed, the factory rotor is taken off and the aftermarket rotor is installed. Everything is re-installed back together. Installing new brake pads is usually done at the same time rotors are being replaced.
Q: What are brake rotors?
A: Rotors are the flat disk-like plates that provide friction for the brake pads to slow down your car. Some rotors have cooling fins between both faces are called "vented" rotors, or drilled which are called "cross-drilled" rotors. Replacing your factory rotors with aftermarket rotors will improve your braking power, which can be a high priority if you add performance parts to your car. You don't want to beef up the performance of your car without also improving your stopping power.
Q: Do rotors come in sets of 4?
A: Rotors are sold individually, per side, unless otherwise noted on our website. Rotors should normally be replaced in sets of two; you should buy 2 rotors for the front, or 2 rotors for the rear, or all 4 at once.
A: Rotors are installed by removing the entire brake assembly and caliper. Once removed, the factory rotor is taken off and the aftermarket rotor is installed. Everything is re-installed back together. Installing new brake pads is usually done at the same time rotors are being replaced.
Q: What are brake rotors?
A: Rotors are the flat disk-like plates that provide friction for the brake pads to slow down your car. Some rotors have cooling fins between both faces are called "vented" rotors, or drilled which are called "cross-drilled" rotors. Replacing your factory rotors with aftermarket rotors will improve your braking power, which can be a high priority if you add performance parts to your car. You don't want to beef up the performance of your car without also improving your stopping power.
Q: Do rotors come in sets of 4?
A: Rotors are sold individually, per side, unless otherwise noted on our website. Rotors should normally be replaced in sets of two; you should buy 2 rotors for the front, or 2 rotors for the rear, or all 4 at once.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
For 2000-2005 Jaguar S Type Brake Rotor Set Front Dynamic Friction 24885RJCS
Front Brake Rotors Brake Pads for 2007 - 2017 Toyota RAV4 Pirus V Lexus HS250H
Front Drilled Brake Rotors Pads Kit for Toyota Camry Avalon Lexus ES350 07-21
Front Drilled Rotors Ceramic Brake Pads for 2009-2019 Toyota Corolla Matrix Vibe
Front Drilled Rotors Brake Pads for 07-17 Toyota Camry, 08-18 Avalon 07-18 ES350
© 1997- Andy's Auto Sport | All Rights Reserved.