1-800-419-1152
Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Home
Intake
Cold Air Intakes
Stillen
![]()
Product Detail
Cold Air Intakes
Stillen
Select Your Vehicle
Select Your Vehicle
Stillen Hi-Flow Intake With Sensor
Part #: 402938AS
$151.10 For each
Featured Videos
-
Video Description:On this episode of Andy's Auto Sport TV, we explain all the basics about mass air flow sensors and what you need to know about them!
-
Video Description:Explanation of the Difference Between Cold Air Intakes and Short Ram Intakes on Andy's Auto Sport TV
-
Video Description:For California Residents: Andy's Auto Sport TV Explains Everything You Need to Know About CARB Certification
Fits On:
91-94 Nissan 240sx DOHC
Description:
The first step in upgrading your car's performance is to replace the restrictive stock air box with a Stillen Hi-Flow Intake. Additional air flow increases the engine's efficiency and power output by increasing the quantity of the air/fuel ratio. The Stillen Hi-Flow consists of a precision machined ring and a gauze element (cleanable) filter. Like a velocity stack, the ring uses the venturi effect to accelerate air intake speed. Power and throttle response will improve throughout the entire RPM range. Your best dollar-per-horsepower investment by far! Most people find the authoritative note of the intake pleasing, but note that increased noise levels result. With CARB approval, most Stillen Hi-Flow Intakes are 50 state legal. Clean your filter regularly for best results. Actual product may vary slightly from image.
The first step in upgrading your car's performance is to replace the restrictive stock air box with a Stillen Hi-Flow Intake. Additional air flow increases the engine's efficiency and power output by increasing the quantity of the air/fuel ratio. The Stillen Hi-Flow consists of a precision machined ring and a gauze element (cleanable) filter. Like a velocity stack, the ring uses the venturi effect to accelerate air intake speed. Power and throttle response will improve throughout the entire RPM range. Your best dollar-per-horsepower investment by far! Most people find the authoritative note of the intake pleasing, but note that increased noise levels result. With CARB approval, most Stillen Hi-Flow Intakes are 50 state legal. Clean your filter regularly for best results. Actual product may vary slightly from image.
If ever there was a company known for its illustrious history in motorsports of all types, it's Stillen. Owners Steve Millen and David Schollum have had more than four decades of racing experience, from Formula and GT to stadium off-road racing, and have built Stillen to be a worldwide leader in aftermarket performance parts and accessories for cars, trucks, and SUVs. From mild to wild, Stillen makes products that will have your ride standing apart from, and ahead of, the pack.
Q: How do you install a cold air intake?
A: Cold air intakes are a true bolt-on application. The removal of your factory air box and resonator will be needed and the cold air intake installed in its place. Basic hand tools are needed, and the intake installs in minutes.
Q: Are cold air intakes offered for every vehicle?
A: Cold air intakes are not offered for every vehicle and are vehicle specific. There are no universal kits available on the market.
Q: What's the difference between a cold air intake and a short ram intake?
A: Cold air intakes are usually placed in the fender well area, which brings in a cooler charged air from beneath the car (outside of the engine bay), which is denser and therefore creates more power. The piping is a lot longer than a short ram which means the power gains are not seen until the mid to higher RPM band. A short ram intake is located inside the engine bay and creates power with better response times than a cold air, however the air is not as dense, which means that it doesn't make as much power in the upper RPM region and makes less power overall.
Q: Do you have to buy an air filter if you're buying a cold air intake?
A: Cold air intakes are usually sold with all the components needed including the filter and all adapters.
Q: What do cold air intakes do? Why buy a cold air intake?
A: Cold air intakes bring more air into the engine, which creates more power during combustion. Cold air intakes will generally help with throttle response and higher power gains, adding a pleasing induction sound to your engine under acceleration. A cold air intake also significantly cleans up your under-hood appearance and makes it easier to see and access components of your engine bay.
A: Cold air intakes are a true bolt-on application. The removal of your factory air box and resonator will be needed and the cold air intake installed in its place. Basic hand tools are needed, and the intake installs in minutes.
Q: Are cold air intakes offered for every vehicle?
A: Cold air intakes are not offered for every vehicle and are vehicle specific. There are no universal kits available on the market.
Q: What's the difference between a cold air intake and a short ram intake?
A: Cold air intakes are usually placed in the fender well area, which brings in a cooler charged air from beneath the car (outside of the engine bay), which is denser and therefore creates more power. The piping is a lot longer than a short ram which means the power gains are not seen until the mid to higher RPM band. A short ram intake is located inside the engine bay and creates power with better response times than a cold air, however the air is not as dense, which means that it doesn't make as much power in the upper RPM region and makes less power overall.
Q: Do you have to buy an air filter if you're buying a cold air intake?
A: Cold air intakes are usually sold with all the components needed including the filter and all adapters.
Q: What do cold air intakes do? Why buy a cold air intake?
A: Cold air intakes bring more air into the engine, which creates more power during combustion. Cold air intakes will generally help with throttle response and higher power gains, adding a pleasing induction sound to your engine under acceleration. A cold air intake also significantly cleans up your under-hood appearance and makes it easier to see and access components of your engine bay.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
Cold Air Intake Pipe System w/ Filter Heat Shield for BMW F10 520i 528i 2.0L N20
Cold Air Intake System For BMW 12-15 335i/14-16 435i M235i /16 M2 N55 3.0L Turbo
Cold Air Intake System For 2011 2015 Dodge Durango Jeep Grand Cherokee 3.6L V6
For 2011-2020 Challenger Chrysler 300 3.6L V6 Heat Shield Cold Air Intake Kit US
Cold Air Intake System+Heat Shield For 99-06 GMC/Chevy V8 4.8L/5.3L/6.0L Black
