Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Skunk2 Cold - Air Intake
Part #: 343-05-0200
$393.45
$373.78
For each
For each
Free Shipping! *to continental U.S. only
Fits On:
12-13 Honda Civic Coupe (Si)
Description:
Through Its Technical Partnership with the Championship-Winning Compass360 Racing Team, Engineers at Skunk2 Have Developed an All New Cold Air Intake System for the 12-13 Honda Civic Si. the Results Are the Best Performing, Best Fitting Intake System Netting +6Whp and +8Lbs-Ft of Torque.
Skunk2'S Cold-Air Intake is Manufactured from Molded Polymer Plastic for Superior Intake Air Insulation when Compared to Aluminum As Well As for a Smooth, Continuous Taper. when Compared to Aluminum, the Thicker Polymer Material Results in a Superior Thermal Barrier and Lower Intake Air Temperatures. Each Kit Includes a 3.5- Inch Internal Diameter Lower Tube and a Tapered, 3.5- Inch to 3.0- Inch Internal Diameter Upper Tube that Connects to the Factory Throttle Body with a High-Quality, Silicone Connector (Larger Diameter Connectors for Use with Skunk2 Throttle Bodies or Similar Sold Separately).
In an Effort to Reduce the Possibility of Submerging the Air Filter During Wet Conditions, Skunk2'S Design Positions the Air Filter Downward-Facing for Approximately Two Inches of Additional Ground Clearance when Compared to Competitors Designs that Locate the Air Filter from the Side. That, Combined with a Design that Doesn'T Require Cutting or Modifying the Factory Fender Liners, Greatly Reduces the Chances of Water Entering the Intake During Wet Conditions.
Unlike Other Intake Systems, Only Skunk2'S Unique Design and Brackets Allow for the Oem Battery to Be Retained.
Through Its Technical Partnership with the Championship-Winning Compass360 Racing Team, Engineers at Skunk2 Have Developed an All New Cold Air Intake System for the 12-13 Honda Civic Si. the Results Are the Best Performing, Best Fitting Intake System Netting +6Whp and +8Lbs-Ft of Torque.
Skunk2'S Cold-Air Intake is Manufactured from Molded Polymer Plastic for Superior Intake Air Insulation when Compared to Aluminum As Well As for a Smooth, Continuous Taper. when Compared to Aluminum, the Thicker Polymer Material Results in a Superior Thermal Barrier and Lower Intake Air Temperatures. Each Kit Includes a 3.5- Inch Internal Diameter Lower Tube and a Tapered, 3.5- Inch to 3.0- Inch Internal Diameter Upper Tube that Connects to the Factory Throttle Body with a High-Quality, Silicone Connector (Larger Diameter Connectors for Use with Skunk2 Throttle Bodies or Similar Sold Separately).
In an Effort to Reduce the Possibility of Submerging the Air Filter During Wet Conditions, Skunk2'S Design Positions the Air Filter Downward-Facing for Approximately Two Inches of Additional Ground Clearance when Compared to Competitors Designs that Locate the Air Filter from the Side. That, Combined with a Design that Doesn'T Require Cutting or Modifying the Factory Fender Liners, Greatly Reduces the Chances of Water Entering the Intake During Wet Conditions.
Unlike Other Intake Systems, Only Skunk2'S Unique Design and Brackets Allow for the Oem Battery to Be Retained.
Q: What do cold air intakes do? Why buy a cold air intake?
A: Cold air intakes bring more air into the engine, which creates more power during combustion. Cold air intakes will generally help with throttle response and higher power gains, adding a pleasing induction sound to your engine under acceleration. A cold air intake also significantly cleans up your under-hood appearance and makes it easier to see and access components of your engine bay.
Q: Are cold air intakes offered for every vehicle?
A: Cold air intakes are not offered for every vehicle and are vehicle specific. There are no universal kits available on the market.
Q: What's the difference between a cold air intake and a short ram intake?
A: Cold air intakes are usually placed in the fender well area, which brings in a cooler charged air from beneath the car (outside of the engine bay), which is denser and therefore creates more power. The piping is a lot longer than a short ram which means the power gains are not seen until the mid to higher RPM band. A short ram intake is located inside the engine bay and creates power with better response times than a cold air, however the air is not as dense, which means that it doesn't make as much power in the upper RPM region and makes less power overall.
Q: How do you install a cold air intake?
A: Cold air intakes are a true bolt-on application. The removal of your factory air box and resonator will be needed and the cold air intake installed in its place. Basic hand tools are needed, and the intake installs in minutes.
Q: Do you have to buy an air filter if you're buying a cold air intake?
A: Cold air intakes are usually sold with all the components needed including the filter and all adapters.
A: Cold air intakes bring more air into the engine, which creates more power during combustion. Cold air intakes will generally help with throttle response and higher power gains, adding a pleasing induction sound to your engine under acceleration. A cold air intake also significantly cleans up your under-hood appearance and makes it easier to see and access components of your engine bay.
Q: Are cold air intakes offered for every vehicle?
A: Cold air intakes are not offered for every vehicle and are vehicle specific. There are no universal kits available on the market.
Q: What's the difference between a cold air intake and a short ram intake?
A: Cold air intakes are usually placed in the fender well area, which brings in a cooler charged air from beneath the car (outside of the engine bay), which is denser and therefore creates more power. The piping is a lot longer than a short ram which means the power gains are not seen until the mid to higher RPM band. A short ram intake is located inside the engine bay and creates power with better response times than a cold air, however the air is not as dense, which means that it doesn't make as much power in the upper RPM region and makes less power overall.
Q: How do you install a cold air intake?
A: Cold air intakes are a true bolt-on application. The removal of your factory air box and resonator will be needed and the cold air intake installed in its place. Basic hand tools are needed, and the intake installs in minutes.
Q: Do you have to buy an air filter if you're buying a cold air intake?
A: Cold air intakes are usually sold with all the components needed including the filter and all adapters.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
Ares RED For 2010-2015 Camaro 6.2L V8 Heat Shield Cold Air Intake Kit +Filter
Ares GK 2019-2025 Silverado 5.3L/6.2L V8 Heat Shield Cold Air Intake Kit+Filter
BCP BLACK 11-23 Charger/Challenger/300 3.6 V6 Heat Shield Cold Air Intake+Filter
BCP RED For 2005-2023 Tacoma 2.7L L4 Heat Shield Cold Air Intake Kit+Filter
Fit 99-07 Chevy GMC V8 4.8L/5.3L/6.0L 4" Cold Air Intake Kit+Heat Shield Black
