1-800-419-1152
Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Home
Intake
Cold Air Intakes
Skunk2
![]()
Product Detail
Cold Air Intakes
Skunk2
Select Your Vehicle
Select Your Vehicle
Skunk2 Composite Cold Air Intake
Part #: 343-05-0100
$393.45
$373.78
For kit
For kit
Free Shipping! *to continental U.S. only
Fits On:
06-11 Honda Civic (Coupe Si)
Description:
Skunk2 drew upon its experience and longstanding technical partnership with championship-winning Compass360 Racing when developing its all-new Cold-Air Intake for the '06-'11 Civic Si. The results are the best performing, best fitting intake system available.
Skunk2's Cold-Air Intake is manufactured from molded polymer plastic for superior intake air insulation when compared to aluminum as well as for a smooth, continuous taper. When compared to aluminum, the thicker polymer material results in a superior thermal barrier and lower intake air temperatures. Each kit includes a 3.5-inch internal diameter lower tube and a tapered, 3.5-inch to 3.0-inch internal diameter upper tube that connects to the factory throttle body with a high-quality, silicone connector (larger diameter connector for use with Skunk2 throttle bodies or similar sold separately). The two-piece design and supplied MAF sensor adapter allows for compatibility with vehicles utilizing the factory ECU. A silicone coupler featuring a smooth, tapered transition better the two tubes is also included for vehicles equipped with aftermarket engine management systems that don't utilize MAF sensors.
In an effort to reduce the possibility of submerging the air filter during wet conditions, Skunk2's design positions the air filter downward-facing for approximately two inches of additional ground clearance when compared to competitors' designs that locate the air filter from the side. That, combined with a design that doesn't require cutting or modifying the factory fender liners, greatly reduces the chances of water entering the intake during wet conditions.
Each Cold-Air Intake kit includes relocation hardware for the battery, ECU, fuse box, and cooling system reservoir tank as well as high-quality stainless Steel clamps and mounting hardware. Unlike other intake systems, only Skunk2's unique design and brackets allow for the OEM battery to be retained. A specially shaped, silicone upper radiator hose is also included with each kit to ensure maximum clearance for the intake tubing and proper fitment.
Skunk2 developed its unique Cold-Air Intake system in 2009 for back-to-back Grand-Am champions and racing partners Compass360 Racing. Now that the team is retiring its eighth-generation Civic race cars, they can finally release this race-proven technology to enthusiasts.
Skunk2 drew upon its experience and longstanding technical partnership with championship-winning Compass360 Racing when developing its all-new Cold-Air Intake for the '06-'11 Civic Si. The results are the best performing, best fitting intake system available.
Skunk2's Cold-Air Intake is manufactured from molded polymer plastic for superior intake air insulation when compared to aluminum as well as for a smooth, continuous taper. When compared to aluminum, the thicker polymer material results in a superior thermal barrier and lower intake air temperatures. Each kit includes a 3.5-inch internal diameter lower tube and a tapered, 3.5-inch to 3.0-inch internal diameter upper tube that connects to the factory throttle body with a high-quality, silicone connector (larger diameter connector for use with Skunk2 throttle bodies or similar sold separately). The two-piece design and supplied MAF sensor adapter allows for compatibility with vehicles utilizing the factory ECU. A silicone coupler featuring a smooth, tapered transition better the two tubes is also included for vehicles equipped with aftermarket engine management systems that don't utilize MAF sensors.
In an effort to reduce the possibility of submerging the air filter during wet conditions, Skunk2's design positions the air filter downward-facing for approximately two inches of additional ground clearance when compared to competitors' designs that locate the air filter from the side. That, combined with a design that doesn't require cutting or modifying the factory fender liners, greatly reduces the chances of water entering the intake during wet conditions.
Each Cold-Air Intake kit includes relocation hardware for the battery, ECU, fuse box, and cooling system reservoir tank as well as high-quality stainless Steel clamps and mounting hardware. Unlike other intake systems, only Skunk2's unique design and brackets allow for the OEM battery to be retained. A specially shaped, silicone upper radiator hose is also included with each kit to ensure maximum clearance for the intake tubing and proper fitment.
Skunk2 developed its unique Cold-Air Intake system in 2009 for back-to-back Grand-Am champions and racing partners Compass360 Racing. Now that the team is retiring its eighth-generation Civic race cars, they can finally release this race-proven technology to enthusiasts.
Q: Which models does this product, Skunk2 part number 343-05-0100, fit?
A: This intake kit is made specifically for the Civic Si, both coupe and sedan.
Q: Do you have to buy an air filter if you're buying a cold air intake?
A: Cold air intakes are usually sold with all the components needed including the filter and all adapters.
Q: Are cold air intakes offered for every vehicle?
A: Cold air intakes are not offered for every vehicle and are vehicle specific. There are no universal kits available on the market.
Q: What's the difference between a cold air intake and a short ram intake?
A: Cold air intakes are usually placed in the fender well area, which brings in a cooler charged air from beneath the car (outside of the engine bay), which is denser and therefore creates more power. The piping is a lot longer than a short ram which means the power gains are not seen until the mid to higher RPM band. A short ram intake is located inside the engine bay and creates power with better response times than a cold air, however the air is not as dense, which means that it doesn't make as much power in the upper RPM region and makes less power overall.
Q: What do cold air intakes do? Why buy a cold air intake?
A: Cold air intakes bring more air into the engine, which creates more power during combustion. Cold air intakes will generally help with throttle response and higher power gains, adding a pleasing induction sound to your engine under acceleration. A cold air intake also significantly cleans up your under-hood appearance and makes it easier to see and access components of your engine bay.
Q: How do you install a cold air intake?
A: Cold air intakes are a true bolt-on application. The removal of your factory air box and resonator will be needed and the cold air intake installed in its place. Basic hand tools are needed, and the intake installs in minutes.
A: This intake kit is made specifically for the Civic Si, both coupe and sedan.
Q: Do you have to buy an air filter if you're buying a cold air intake?
A: Cold air intakes are usually sold with all the components needed including the filter and all adapters.
Q: Are cold air intakes offered for every vehicle?
A: Cold air intakes are not offered for every vehicle and are vehicle specific. There are no universal kits available on the market.
Q: What's the difference between a cold air intake and a short ram intake?
A: Cold air intakes are usually placed in the fender well area, which brings in a cooler charged air from beneath the car (outside of the engine bay), which is denser and therefore creates more power. The piping is a lot longer than a short ram which means the power gains are not seen until the mid to higher RPM band. A short ram intake is located inside the engine bay and creates power with better response times than a cold air, however the air is not as dense, which means that it doesn't make as much power in the upper RPM region and makes less power overall.
Q: What do cold air intakes do? Why buy a cold air intake?
A: Cold air intakes bring more air into the engine, which creates more power during combustion. Cold air intakes will generally help with throttle response and higher power gains, adding a pleasing induction sound to your engine under acceleration. A cold air intake also significantly cleans up your under-hood appearance and makes it easier to see and access components of your engine bay.
Q: How do you install a cold air intake?
A: Cold air intakes are a true bolt-on application. The removal of your factory air box and resonator will be needed and the cold air intake installed in its place. Basic hand tools are needed, and the intake installs in minutes.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
Cold Air Intake Pipe System w/ Filter Heat Shield for BMW F10 520i 528i 2.0L N20
Cold Air Intake System For BMW 12-15 335i/14-16 435i M235i /16 M2 N55 3.0L Turbo
Cold Air Intake System for 2011-2019 Dodge Charger 3.6L V6 In Wrinkle Red Finish
New Cold Air Intake Kit For 12-16 BMW F30 228i 320i 328i 420i 428i 2.0T N20 N26
BCP BLACK For 2005-2006 Corolla/2005-2007 Matrix 1.8L Cold Air Intake Kit+Filter
