1-800-419-1152
Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Omix-Ada OMI Steering Boxes - Omix Steering Gear Box Manual 87-98 Cherokee (XJ)
Part #: 18001.03
$599.99 For each
Featured Videos
-
Video Description:Drop spindles and drop knuckles are an effective way to lower your vehicle. Video highlights include:
*At 0:11, we explain the advantages of drop spindles and drop knuckles, including the facts that the factory suspension geometry and travel are unaffected.
*At 1:44, we explain that it is possible to combine drop spindles/knuckles with lowering springs to achieve an even lower ride height.
Fits On:
1990 Jeep Cherokee, 1988 Jeep Cherokee, 1987 Jeep Cherokee, 1989 Jeep Cherokee
Description:
Omix-Ada's replacement manual steering gear box meets or exceeds OEM quality and fits 84-96 Cherokee XJ, 87-95 Wrangler YJ, and 97-99 Wrangler TJ models. It directly replaces OE part 52000089.
Omix-Ada's replacement manual steering gear box meets or exceeds OEM quality and fits 84-96 Cherokee XJ, 87-95 Wrangler YJ, and 97-99 Wrangler TJ models. It directly replaces OE part 52000089.
Omix-Ada is a Suwanee, Georgia based-company that strives to improve the off-roading experience for you and your Jeep. The owner of Omix-Ada is a Jeep enthusiast whose life-long passion eventually led to a company that has been developing the best for Jeeps for the past two decades.
Widespread appraise has landed Omix-Ada in the top step of the Jeep aftermarket world. Due to their consistently high-quality products built with heritage in mind, Omix-Ada has been given the rights to use "MOPAR Authentic Restoration" and "MOPAR Official Licensed Product" logos for the more than 30 licensed parts they produce. With a lifetime of experience, relatively-small company size, and insatiable thirst for quality and improvement, buying Omix-Ada through Andy's Auto Sport is a sure bet.
Widespread appraise has landed Omix-Ada in the top step of the Jeep aftermarket world. Due to their consistently high-quality products built with heritage in mind, Omix-Ada has been given the rights to use "MOPAR Authentic Restoration" and "MOPAR Official Licensed Product" logos for the more than 30 licensed parts they produce. With a lifetime of experience, relatively-small company size, and insatiable thirst for quality and improvement, buying Omix-Ada through Andy's Auto Sport is a sure bet.
Featured Videos
-
Video Description:Drop spindles and drop knuckles are an effective way to lower your vehicle. Video highlights include:
*At 0:11, we explain the advantages of drop spindles and drop knuckles, including the facts that the factory suspension geometry and travel are unaffected.
*At 1:44, we explain that it is possible to combine drop spindles/knuckles with lowering springs to achieve an even lower ride height.
Q: Why buy a spindle?
A: We sell spindles that lower your truck. Dropped spindles are simply spindle castings where the axle (or hub center) is moved up away from the lower ball joint. This lowers your truck by moving your wheel up in the fender well. There is a limit to how far you can move the axle up (you run out of casting), which is why you see most spindle applications drop about 2 inches.
Q: What exactly is a spindle?
A: According to DJM Suspension: "While control arms might be considered the horizontal members of the front end, spindles would be the vertical member that ties the control arms together. Both upper and lower control arms attach themselves through ball joints to the spindle. This is a cast iron part where the machined or steering knuckle is located. The wheel bearings and brake rotors are mounted to the axle, and the spindle also locates the brake caliper and tie rod end (steering). Steering knuckles are found on some late model trucks. They do exactly the same thing as a traditional spindle only there is no axle mounted in them. A hub center which has wheel bearings and wheel mounting hubs integrated together just bolts into the knuckle."
Q: Will drop spindles affect the camber of my tires? Will I need to re-align them?
A: No, one of the beauties of using drop spindles to lower your truck is that they maintain the camber of the wheels since the interact with the control arms the same as the factory spindle does. The only drawback to spindles is that there is only so far you can lower your truck with drop spindles alone. So if you are happy with a moderate drop, then drop spindles are probably the best possible option overall. If you want to get more drop than the drop spindle alone offers, you can add a dropped coil spring to the mix. It accomplishes the purpose of additional lowering, but you lose suspension travel (which reduces ride quality). Lowered coils also have a higher spring rate, (which reduces ride quality) and you usually need to replace your shock absorber with a shorter one (this could reduce ride quality). And all of this costs more. A spindle and spring combination will lower your truck a long way, but pay attention to wheel clearance, alignment, and watch your ride quality. At some point the loss of suspension travel might get too you.
A: We sell spindles that lower your truck. Dropped spindles are simply spindle castings where the axle (or hub center) is moved up away from the lower ball joint. This lowers your truck by moving your wheel up in the fender well. There is a limit to how far you can move the axle up (you run out of casting), which is why you see most spindle applications drop about 2 inches.
Q: What exactly is a spindle?
A: According to DJM Suspension: "While control arms might be considered the horizontal members of the front end, spindles would be the vertical member that ties the control arms together. Both upper and lower control arms attach themselves through ball joints to the spindle. This is a cast iron part where the machined or steering knuckle is located. The wheel bearings and brake rotors are mounted to the axle, and the spindle also locates the brake caliper and tie rod end (steering). Steering knuckles are found on some late model trucks. They do exactly the same thing as a traditional spindle only there is no axle mounted in them. A hub center which has wheel bearings and wheel mounting hubs integrated together just bolts into the knuckle."
Q: Will drop spindles affect the camber of my tires? Will I need to re-align them?
A: No, one of the beauties of using drop spindles to lower your truck is that they maintain the camber of the wheels since the interact with the control arms the same as the factory spindle does. The only drawback to spindles is that there is only so far you can lower your truck with drop spindles alone. So if you are happy with a moderate drop, then drop spindles are probably the best possible option overall. If you want to get more drop than the drop spindle alone offers, you can add a dropped coil spring to the mix. It accomplishes the purpose of additional lowering, but you lose suspension travel (which reduces ride quality). Lowered coils also have a higher spring rate, (which reduces ride quality) and you usually need to replace your shock absorber with a shorter one (this could reduce ride quality). And all of this costs more. A spindle and spring combination will lower your truck a long way, but pay attention to wheel clearance, alignment, and watch your ride quality. At some point the loss of suspension travel might get too you.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
2011-18 Volkswagen Jetta Sport 1.8L FWD Front RH Side Spindle Knuckle Hub *ReaD*
(LOCAL PICKUP ONLY) Passenger Front Spindle/Knuckle 5 Lug Wheel Fits 09-24 DODGE
(LOCAL PICKUP ONLY) Passenger Right Front Spindle/Knuckle Fits 04-15 17-24 ARMAD
Passenger Front Spindle/Knuckle New Style Fits 19-24 DODGE 1500 PICKUP 2122146
(LOCAL PICKUP ONLY) Passenger Front Spindle/Knuckle Spindle Fits 04-08 FORD F150
© 1997- Andy's Auto Sport | All Rights Reserved.