1-800-419-1152
Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Omix-Ada OMI Brake Hoses - Omix Frame Brake Line Set 56-64 Willys CJ-3B
Part #: 16737.11
$48.99 For each
Fits On:
1966 Jeep CJ3, 1959 Jeep CJ3, 1960 Jeep CJ3, 1956 Jeep Willys, 1957 Jeep Willys, 1958 Jeep Willys, 1953 Jeep Willys, 1954 Jeep... See more
Description:
Omix-Ada's frame brake line set is a custom-fit replacement for 1956-1964 Willys CJ-3B models, including pre-bent mild steel lines that route from the master cylinder to the front and rear along the driver's side frame rail. Ends are flared with proper threaded fittings and protective sleeves where applicable. Flexible brake hoses are not included.
Omix-Ada's frame brake line set is a custom-fit replacement for 1956-1964 Willys CJ-3B models, including pre-bent mild steel lines that route from the master cylinder to the front and rear along the driver's side frame rail. Ends are flared with proper threaded fittings and protective sleeves where applicable. Flexible brake hoses are not included.
Omix-Ada is a Suwanee, Georgia based-company that strives to improve the off-roading experience for you and your Jeep. The owner of Omix-Ada is a Jeep enthusiast whose life-long passion eventually led to a company that has been developing the best for Jeeps for the past two decades.
Widespread appraise has landed Omix-Ada in the top step of the Jeep aftermarket world. Due to their consistently high-quality products built with heritage in mind, Omix-Ada has been given the rights to use "MOPAR Authentic Restoration" and "MOPAR Official Licensed Product" logos for the more than 30 licensed parts they produce. With a lifetime of experience, relatively-small company size, and insatiable thirst for quality and improvement, buying Omix-Ada through Andy's Auto Sport is a sure bet.
Widespread appraise has landed Omix-Ada in the top step of the Jeep aftermarket world. Due to their consistently high-quality products built with heritage in mind, Omix-Ada has been given the rights to use "MOPAR Authentic Restoration" and "MOPAR Official Licensed Product" logos for the more than 30 licensed parts they produce. With a lifetime of experience, relatively-small company size, and insatiable thirst for quality and improvement, buying Omix-Ada through Andy's Auto Sport is a sure bet.
Q: What do brake lines do? Why buy brake lines?
A: Brake lines connect the master cylinder to the calipers. The brake lines contain brake fluid so the fluid can push against the caliper every time you press on the brakes, thereby stopping you. Old rubber brake lines expand under pressure, so that instead of the brake fluid pushing the caliper, the fluid stretches the brake line and reduces the maximum performance of the brakes by making your pedal feel spongy. New brake lines combat this problem giving you maximum braking performance and a nice tight pedal feel.
Q: Do brake lines come in sets of 4?
A: Brake lines are sold in sets of two usually and are assumed to be for the front, unless otherwise noted. Please check the product description on our site for more details.
Q: How do you install brake lines?
A: Brake lines are installed by removing your factory rubber line fittings. Once the factory rubber brake line is removed, replace it with your high quality stainless ones. Brake fluid will need to be replaced and the system will need to be bled.
A: Brake lines connect the master cylinder to the calipers. The brake lines contain brake fluid so the fluid can push against the caliper every time you press on the brakes, thereby stopping you. Old rubber brake lines expand under pressure, so that instead of the brake fluid pushing the caliper, the fluid stretches the brake line and reduces the maximum performance of the brakes by making your pedal feel spongy. New brake lines combat this problem giving you maximum braking performance and a nice tight pedal feel.
Q: Do brake lines come in sets of 4?
A: Brake lines are sold in sets of two usually and are assumed to be for the front, unless otherwise noted. Please check the product description on our site for more details.
Q: How do you install brake lines?
A: Brake lines are installed by removing your factory rubber line fittings. Once the factory rubber brake line is removed, replace it with your high quality stainless ones. Brake fluid will need to be replaced and the system will need to be bled.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
Pair 25Ft. 1/4" &3/16" Copper Nickel Brake Line Tubing Kit and 32 Fittings
Prebent Galfan Coated Steel Rear Brake Lines, pair (See description for fitment)
Stainless Steel Rear Axle Brake Lines, pair (See description for fitment)
Prebent Stainless Steel Front Brake Line Kit 89-95 Toyota Truck 4WD
25Ft 3/16 Copper-Coated Brake Line Kit (Include 20 Fittings,2 Unions and 4 Nuts)
© 1997- Andy's Auto Sport | All Rights Reserved.