1-800-419-1152
Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
K&N KN 77 Metal Intake - Hummer H2 V8-6.0/6.2L High Flow Performance Kit
Part #: 77-3037KP
$419.99 For each
Featured Videos
-
Video Description:On this episode of Andy's Auto Sport TV, we explain all the basics about mass air flow sensors and what you need to know about them!
-
Video Description:Explanation of the Difference Between Cold Air Intakes and Short Ram Intakes on Andy's Auto Sport TV
-
Video Description:For California Residents: Andy's Auto Sport TV Explains Everything You Need to Know About CARB Certification
Fits On:
2007 Hummer H2, 2006 Hummer H2, 2003 Hummer H2, 2004 Hummer H2, 2005 Hummer H2, 2009 Hummer H2, 2008 Hummer H2
Description:
K&N's 77 Series Metal Intake for the Hummer H2 V8-6.0/6.2L uses a mandrel-bent aluminum tube paired with an oiled cotton High-Flow Air Filter good for up to 100,000 miles between cleanings. A custom heat shield keeps intake temps down, and installation typically takes under 90 minutes. Not legal for sale or use on pollution-controlled vehicles in California; check CARB status before ordering.
K&N's 77 Series Metal Intake for the Hummer H2 V8-6.0/6.2L uses a mandrel-bent aluminum tube paired with an oiled cotton High-Flow Air Filter good for up to 100,000 miles between cleanings. A custom heat shield keeps intake temps down, and installation typically takes under 90 minutes. Not legal for sale or use on pollution-controlled vehicles in California; check CARB status before ordering.
K&N users would probably be surprised by the amount of air filtration testing and scientific research that goes on in K&N facilities as well as in independent laboratories. As the leader and originator of the high flow performance air filter they are always looking for new ways to provide excellent protection and maximum power for your car, truck, motorcycle, and just about anything else with an engine.
In 2005 more than 1600 vehicles were tested by K&N's R&D group on dynamometers in the US, United Kingdom, and the Netherlands. In addition to these power and torque tests, they also performed more than 110 filtration tests and more than 1,200 air flow tests with their in-house state-of-the-art test equipment. Simply put, if you buy a K&N airflow product, you are buying a product that will get you the most horsepower you can possibly get. Their engineers work tirelessly to make sure of it.
In 2005 more than 1600 vehicles were tested by K&N's R&D group on dynamometers in the US, United Kingdom, and the Netherlands. In addition to these power and torque tests, they also performed more than 110 filtration tests and more than 1,200 air flow tests with their in-house state-of-the-art test equipment. Simply put, if you buy a K&N airflow product, you are buying a product that will get you the most horsepower you can possibly get. Their engineers work tirelessly to make sure of it.
Q: What's the difference between a cold air intake and a short ram intake?
A: Cold air intakes are usually placed in the fender well area, which brings in a cooler charged air from beneath the car (outside of the engine bay), which is denser and therefore creates more power. The piping is a lot longer than a short ram which means the power gains are not seen until the mid to higher RPM band. A short ram intake is located inside the engine bay and creates power with better response times than a cold air, however the air is not as dense, which means that it doesn't make as much power in the upper RPM region and makes less power overall.
Q: What do cold air intakes do? Why buy a cold air intake?
A: Cold air intakes bring more air into the engine, which creates more power during combustion. Cold air intakes will generally help with throttle response and higher power gains, adding a pleasing induction sound to your engine under acceleration. A cold air intake also significantly cleans up your under-hood appearance and makes it easier to see and access components of your engine bay.
Q: Are cold air intakes offered for every vehicle?
A: Cold air intakes are not offered for every vehicle and are vehicle specific. There are no universal kits available on the market.
Q: Do you have to buy an air filter if you're buying a cold air intake?
A: Cold air intakes are usually sold with all the components needed including the filter and all adapters.
Q: How do you install a cold air intake?
A: Cold air intakes are a true bolt-on application. The removal of your factory air box and resonator will be needed and the cold air intake installed in its place. Basic hand tools are needed, and the intake installs in minutes.
A: Cold air intakes are usually placed in the fender well area, which brings in a cooler charged air from beneath the car (outside of the engine bay), which is denser and therefore creates more power. The piping is a lot longer than a short ram which means the power gains are not seen until the mid to higher RPM band. A short ram intake is located inside the engine bay and creates power with better response times than a cold air, however the air is not as dense, which means that it doesn't make as much power in the upper RPM region and makes less power overall.
Q: What do cold air intakes do? Why buy a cold air intake?
A: Cold air intakes bring more air into the engine, which creates more power during combustion. Cold air intakes will generally help with throttle response and higher power gains, adding a pleasing induction sound to your engine under acceleration. A cold air intake also significantly cleans up your under-hood appearance and makes it easier to see and access components of your engine bay.
Q: Are cold air intakes offered for every vehicle?
A: Cold air intakes are not offered for every vehicle and are vehicle specific. There are no universal kits available on the market.
Q: Do you have to buy an air filter if you're buying a cold air intake?
A: Cold air intakes are usually sold with all the components needed including the filter and all adapters.
Q: How do you install a cold air intake?
A: Cold air intakes are a true bolt-on application. The removal of your factory air box and resonator will be needed and the cold air intake installed in its place. Basic hand tools are needed, and the intake installs in minutes.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
K&N Cold Air Intake - Fits Cadillac ATS 2.0T
Cold Air Intake System For 2011-2023 Chrysler 300 Dodge Challenger Charger 5.7T
For BMW 128i 328i 3.0L 2007-2011 Red Filter Cold Air Intake System For 2006 330i
KYOSTAR 3" Cold Air Intake System For 2018 Lexus IS300, 2016-2017 IS200T 2.0T
New 68190498AB Engine Cold Air Intake Tube Hose Boot For 2014-2021 Ram Promaster
© 1997- Andy's Auto Sport | All Rights Reserved.