Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
JLT Painted Plastic Ram Air Intake Kit - Electric Green
Part #: RAI2-FMG-9604-P-SW
$259.00 For kit
Free Shipping! *to continental U.S. only
Fits On:
96-98 Mustang GT, 99-04 Mustang GT
Description:
• New Tube Design: The new JLT tubes are 4" roto molded plastic to resist engine heat and keep the intake air charge nice and cool. NO METAL TUBING HERE!! JLT started from scratch, designing a kit that not only looks great, but installs easy and can flow enough air to support anything it's put on.
• New Heat Shield Design: The heat shield is all new as well. Vacuum formed from ABS plastic and designed to not only look good, but block engine heat at low speed and idle.
• Gains: 8-12 RWHP are typical with this kit.
• Finish Options: Standard finish is an OEM looking black textured plastic and also available in your cars exact body color. All painted tubes go through an in-depth process to remove all the texture, then they use only the best quality materials to give each tube a smooth gloss finish.
• Fitment: Will not fit with Kenne Bell supercharger
• Includes: JLT plastic intake tube, Silicone reducer at the throttle body, Silicone reducer at the MAF, ABS Heat Shield, 4x9 S&B powerstack air filter, MAF adapter, MAF adapter gasket, HD Clamps & all needed hardware.
• New Tube Design: The new JLT tubes are 4" roto molded plastic to resist engine heat and keep the intake air charge nice and cool. NO METAL TUBING HERE!! JLT started from scratch, designing a kit that not only looks great, but installs easy and can flow enough air to support anything it's put on.
• New Heat Shield Design: The heat shield is all new as well. Vacuum formed from ABS plastic and designed to not only look good, but block engine heat at low speed and idle.
• Gains: 8-12 RWHP are typical with this kit.
• Finish Options: Standard finish is an OEM looking black textured plastic and also available in your cars exact body color. All painted tubes go through an in-depth process to remove all the texture, then they use only the best quality materials to give each tube a smooth gloss finish.
• Fitment: Will not fit with Kenne Bell supercharger
• Includes: JLT plastic intake tube, Silicone reducer at the throttle body, Silicone reducer at the MAF, ABS Heat Shield, 4x9 S&B powerstack air filter, MAF adapter, MAF adapter gasket, HD Clamps & all needed hardware.
JLT Performance, based out of Chesapeake, Virginia, is a company that specializes in cold air intakes for a large variety of American cars. Whether you're looking to improve your Mustang's "giddy-up" or add some more "oomph" to your Hemi, the guys at JLT have something for you. Their focus on the intake side of things indicates their focus and insistence on delivering high-quality intakes that will give you quick and reliable horsepower.
Q: How do you install a cold air intake?
A: Cold air intakes are a true bolt-on application. The removal of your factory air box and resonator will be needed and the cold air intake installed in its place. Basic hand tools are needed, and the intake installs in minutes.
Q: Are cold air intakes offered for every vehicle?
A: Cold air intakes are not offered for every vehicle and are vehicle specific. There are no universal kits available on the market.
Q: What do cold air intakes do? Why buy a cold air intake?
A: Cold air intakes bring more air into the engine, which creates more power during combustion. Cold air intakes will generally help with throttle response and higher power gains, adding a pleasing induction sound to your engine under acceleration. A cold air intake also significantly cleans up your under-hood appearance and makes it easier to see and access components of your engine bay.
Q: What's the difference between a cold air intake and a short ram intake?
A: Cold air intakes are usually placed in the fender well area, which brings in a cooler charged air from beneath the car (outside of the engine bay), which is denser and therefore creates more power. The piping is a lot longer than a short ram which means the power gains are not seen until the mid to higher RPM band. A short ram intake is located inside the engine bay and creates power with better response times than a cold air, however the air is not as dense, which means that it doesn't make as much power in the upper RPM region and makes less power overall.
Q: Do you have to buy an air filter if you're buying a cold air intake?
A: Cold air intakes are usually sold with all the components needed including the filter and all adapters.
A: Cold air intakes are a true bolt-on application. The removal of your factory air box and resonator will be needed and the cold air intake installed in its place. Basic hand tools are needed, and the intake installs in minutes.
Q: Are cold air intakes offered for every vehicle?
A: Cold air intakes are not offered for every vehicle and are vehicle specific. There are no universal kits available on the market.
Q: What do cold air intakes do? Why buy a cold air intake?
A: Cold air intakes bring more air into the engine, which creates more power during combustion. Cold air intakes will generally help with throttle response and higher power gains, adding a pleasing induction sound to your engine under acceleration. A cold air intake also significantly cleans up your under-hood appearance and makes it easier to see and access components of your engine bay.
Q: What's the difference between a cold air intake and a short ram intake?
A: Cold air intakes are usually placed in the fender well area, which brings in a cooler charged air from beneath the car (outside of the engine bay), which is denser and therefore creates more power. The piping is a lot longer than a short ram which means the power gains are not seen until the mid to higher RPM band. A short ram intake is located inside the engine bay and creates power with better response times than a cold air, however the air is not as dense, which means that it doesn't make as much power in the upper RPM region and makes less power overall.
Q: Do you have to buy an air filter if you're buying a cold air intake?
A: Cold air intakes are usually sold with all the components needed including the filter and all adapters.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
Ares RED For 2010-2015 Camaro 6.2L V8 Heat Shield Cold Air Intake Kit +Filter
Ares GK 2019-2025 Silverado 5.3L/6.2L V8 Heat Shield Cold Air Intake Kit+Filter
Dual Cold Air Black Intake Kit+Blue Air Filter for 09-20 370Z/09-13 G37 3.7L V6
BCP BLACK 11-23 Charger/Challenger/300 3.6 V6 Heat Shield Cold Air Intake+Filter
For 2015-2018 Mercedes-Benz C180 C200 C300 W205 KYOSTAR Cold Air Intake Kit Pipe
