1-800-419-1152
Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
FOX 2.5 Factory Bypass Shock - 2.5 Factory Series 18in. Remote Res. 3-Tube Bypass Shock (2 Cmp/1 Reb) 7/8in. Shft(21/70) - Blk
Part #: 980-02-117
$1,149.95 For each
Fits On:
Universal
Description:
FOX's 2.5 Factory Series 18-inch remote reservoir bypass shock runs a 3-tube bypass design with 2 compression and 1 rebound zone and a 7/8-inch shaft, built for serious off-road use where consistent damping under hard punishment matters.
FOX's 2.5 Factory Series 18-inch remote reservoir bypass shock runs a 3-tube bypass design with 2 compression and 1 rebound zone and a 7/8-inch shaft, built for serious off-road use where consistent damping under hard punishment matters.
Q: What are struts and shocks? Why buy them?
A: Shock absorbers (shocks) are a device that controls spring motion through dampening. A shock absorber slows down and reduces the vibrations created by imperfections in the roadway. A strut is a shock absorber mounted inside a coil spring that does the same job of dampening. Whether your car uses a strut or shock depends on the factory setup, but both do the same thing and are synonymous in terms of their function. The product listings on our website indicate exactly what is available for your car. Aftermarket struts or shocks are an especially good purchase when lowering your car because they are specially made for optimal performance based on ride height, and can handle the extra stress your suspension will throw at them. Your factory struts or shocks will be out of their "comfort zone" if you lower your car, which causes them to wear down faster and ultimately fail. You can definitely lower your car without replacing the struts/shocks, but they will wear down quickly, and you ride quality will suffer.
Q: Is there any difference between struts and shocks?
A: Struts/shocks both have the same job by dampening the kinetic energy of suspension travel. Struts perform two jobs: They provide a dampening function like shock absorbers, and they provide structural support for the vehicles suspension. That means that the struts deliver a bit more than shock absorbers, which don't support vehicle weight but control the speed at which weight is transferred in a vehicle. Either way, your options are limited to what is available for your car.
Q: How do you install shocks/struts?
A: Shocks are easier to install because there are only two bolts holding in each shock absorber. Struts are a bit more difficult because there is a compressed spring that needs to be removed first. Once the spring has been removed the new strut can be installed with the OEM or aftermarket spring re-installed.
Q: Do shocks come in sets of 4?
A: Struts and shocks are sold individually on our website, but purchasing should always be done in pairs at the minimum (one pair for the front, one for the rear). Most people replace all four shocks/struts at once.
A: Shock absorbers (shocks) are a device that controls spring motion through dampening. A shock absorber slows down and reduces the vibrations created by imperfections in the roadway. A strut is a shock absorber mounted inside a coil spring that does the same job of dampening. Whether your car uses a strut or shock depends on the factory setup, but both do the same thing and are synonymous in terms of their function. The product listings on our website indicate exactly what is available for your car. Aftermarket struts or shocks are an especially good purchase when lowering your car because they are specially made for optimal performance based on ride height, and can handle the extra stress your suspension will throw at them. Your factory struts or shocks will be out of their "comfort zone" if you lower your car, which causes them to wear down faster and ultimately fail. You can definitely lower your car without replacing the struts/shocks, but they will wear down quickly, and you ride quality will suffer.
Q: Is there any difference between struts and shocks?
A: Struts/shocks both have the same job by dampening the kinetic energy of suspension travel. Struts perform two jobs: They provide a dampening function like shock absorbers, and they provide structural support for the vehicles suspension. That means that the struts deliver a bit more than shock absorbers, which don't support vehicle weight but control the speed at which weight is transferred in a vehicle. Either way, your options are limited to what is available for your car.
Q: How do you install shocks/struts?
A: Shocks are easier to install because there are only two bolts holding in each shock absorber. Struts are a bit more difficult because there is a compressed spring that needs to be removed first. Once the spring has been removed the new strut can be installed with the OEM or aftermarket spring re-installed.
Q: Do shocks come in sets of 4?
A: Struts and shocks are sold individually on our website, but purchasing should always be done in pairs at the minimum (one pair for the front, one for the rear). Most people replace all four shocks/struts at once.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
Bilstein 24166874 - Suspension Shock Absorber, Rear (1)
2018 2019 2020 DODGE DURANGO RWD REAR SHOCK ABSORBER STRUT PAIR OEM
FITS 2014 2015 2016-2019 Explorer AWD Front Passenger & Driver Strut Shock Set
4x Front Rear Complete Strut Shock Assembly For 2007-2010 Hyundai Elantra Sedan
Monroe Shocks & Struts OESpectrum Amortiguador Fits 2012-2015 Honda Civic EX LX
© 1997- Andy's Auto Sport | All Rights Reserved.