EXTERIOR
INTERIOR
LIGHTS
PERFORMANCE
SUSPENSION
BRAKES
DRIVETRAIN
WHEELS
 Select Your Vehicle

 Select Your Vehicle

Edelbrock EDE Gear Drive - Accu-Drive Gear Drive S/B Ford 65-84


Part #: 7892


$335.95 For each
Free Shipping! *to continental U.S. only









Product Details
Fits On:
1980 Mercury Cougar, 1988 Mercury Cougar, 1987 Mercury Cougar, 1986 Mercury Cougar, 1985 Mercury Cougar, 1984 Mercury Cougar, ... See more

Description:
Edelbrock's Accu-Drive gear drive kit (part #7892) replaces the stock timing chain on small-block Ford engines with a compound gear drive system machined from billet SAE-1144 steel with induction-hardened, shaved teeth. The floating main idler self-positions between the crank and cam gears for equal load sharing, eliminating chain stretch and allowing multiple cam timing adjustments. Some fitting of the axles and front cover may be required during installation.
About Edelbrock
Edelbrock is a legendary performance parts manufacturer. It was founded in 1931 by Vic Edelbrock, and has an incredible history of success throughout the last last century.

Edelbrock has over six locations totaling over 600,000 square feet, all in California. Their research and development capabilities are phenomenal. Perhaps more than any other aftermarket automotive brand in the world, Edelbrock is known to be a name brand you can trust.
FAQs
Q: What do cam gears do? Why buy cam gears?
A: Cam gears are used by many for a reliable, precise and affordable method of fine-tuning the action of the valves. This complements the installation of performance add-ons such as headers, camshafts, intakes or specialty milling work on built motors. Cam gears are often used for adjusting the timing degree of newly installed camshafts in your motor. You want to adjust cam timing to make the maximum power with your motor. If you buy aftermarket cam shafts, you cannot fine tune them to make more power if you don't have a set of adjustable cam gears.

Q: Do cam gears come individually?
A: Cam gears are sold individually unless otherwise noted. Depending on whether your vehicle is a single overhead cam (SOHC) or a dual overhead cam (DOHC), you will need one or two cam gears.

Q: How do you install cam gears?
A: Installation should be left to the pros on this one since timing will be involved. If you plan on doing it yourself, removal of the upper timing belt cover will need to be done to reveal the cam gears. The valve cover along with the camshafts will need to be removed. Once this is done, replace the factory cam gears with your new ones and reinstall onto your camshaft. Make sure when you remove and reinstall the camshafts and cam gears they are at top dead center (TDC). Replace everything as you removed them and re-time your vehicle.

Image Description:
A lot of Edelbrock's success can be traced to its early involvement in midget car racing, where many new Edelbrock parts were tested.
Image Description:
Edelbrock has been making engines faster since flatheads were still new technology!

Image Description:
Edelbrock was one of the first companies to use an engine dynamometer to test performance gains. The Clayton dyno was capable of recording up to 200-horsepower.
Image Description:
Edelbrock's first parts catalog was printed just after WWII, in 1946.

Image Description:
Edelbrock's first purpose-built manufacturing facility in 1949.
Image Description:
Edelbrock's giant campus in Torrance, California houses its design, testing, and manufacturing departments.

Image Description:
Founder of Edelbrock, Vic Edelbrock, Sr.
Image Description:
The infamous Ford flathead Edelbrock Slingshot intake manifold. It was the first to bear the Edelbrock name.

Image Description:
The So Cal Special streamliner used Edelbrock parts through the early 1950s.
Image Description:
Vic Edelbrock, Sr., in his '32 Ford highboy roadster, crossing the timing lights at El Mirage.

Image Description:
Vic with his six-carb Ram Log intake manifold.
Image Description:
Vic, Sr., and his successor, Vic Edelbrock, Jr.

Image Description:
Vic's '32 Ford went 112MPH way back in 1939! It may not sound fast by today's standards, but it paved the way for modern hot rodding.




If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.



Have a question about this product? Click here to email us!




When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Not able to find what you are looking for?

DARKSTAR Racing Adjustable Cam Gears For Honda / Acura B series B16 B18 Vtec

[P0016 P0017 P0018 P0019] 2013-2016 Subaru BRZ Scion FRS Cam Gears Set of 4 OEM

⭐️N18 Engine Intake Camshaft OEM Mini Cooper S 1.6 Turbo R55 R56 R57 R58 R59

AEM Cam Gears 23-802BK B Series B18A B18B B16 B17 B18C B18C5 Integra Civic PAIR

OEM 02-06 Acura RSX VTC Actuator Cam Gear 50 Degrees K20 06-11 Civic SI RBC VTEC

Click here to view more Cam Gears on eBay





Popular Categories
Exhaust Systems
Cold Air Intakes
Headlights
Tail Lights
Body Kits
Hoods
Struts and Shocks
Racing Seats
Ford 300 Parts
Lincoln Continental Parts
Mercury Capri Parts
Ford 300 Cam Gears
Lincoln Continental Cam Gears
Mercury Capri Cam Gears
Performance Sitemap




Customer Support
Contact Us
Returns Policy
Orders & Shipping
Terms of Service
About Us
About Andy's
In The Media
30-Day Price Protection
Accessibility
Andy's Parts Smarts
Andy's Auto Sport TV
Customer Rides
The Andy's Dictionary
Knowledge Base
Sales Programs
Coupons
Price Stomp
Car Club Discounts
Wholesale Discounts
Newsletter
Sign up and get FREE access to exclusive coupons, guides, and Andy's TV episodes!


© 1997- Andy's Auto Sport | All Rights Reserved.