1-800-419-1152
Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Edelbrock EDE Performer Intake Manifold - SBC LS1 Carbureted
Part #: 7118
$1,027.95 For each
Free Shipping! *to continental U.S. only
Fits On:
Universal
Description:
Edelbrock part #7118 Performer RPM Cathedral Port LS intake manifold with timing control module is an easy solution for those looking to swap a LS engine into their early carbureted vehicle. It allows the use of a carburetor on these originally computer-controlled engines, offering maximum power and a broad torque curve from 1500 to 6500 rpm. The 7118 intake manifold kit comes with a wiring harness and electronic Timing Control Module. The ignition module has an internal MAP sensor, and works with either 24x (Gen II) or 58x (Gen IV) OE sensors to fire the Coil-on-Plug ignition system. A rotary dial offers a choice of six timing curves. More extensive programming of rev limits, nitrous retard etc. available via laptop connection. A special throttle and transmission cable bracket that works with 700R-4, 200R-4 and Turbo 350 transmissions is included, making the LS1 engine an easy retro-fit into any muscle car or street rod application. Uses GM individual o-ring gaskets PN 12533587. Manifold hold down bolts included. For LS rectangle port (LS3) applications see PN 71196.
Edelbrock part #7118 Performer RPM Cathedral Port LS intake manifold with timing control module is an easy solution for those looking to swap a LS engine into their early carbureted vehicle. It allows the use of a carburetor on these originally computer-controlled engines, offering maximum power and a broad torque curve from 1500 to 6500 rpm. The 7118 intake manifold kit comes with a wiring harness and electronic Timing Control Module. The ignition module has an internal MAP sensor, and works with either 24x (Gen II) or 58x (Gen IV) OE sensors to fire the Coil-on-Plug ignition system. A rotary dial offers a choice of six timing curves. More extensive programming of rev limits, nitrous retard etc. available via laptop connection. A special throttle and transmission cable bracket that works with 700R-4, 200R-4 and Turbo 350 transmissions is included, making the LS1 engine an easy retro-fit into any muscle car or street rod application. Uses GM individual o-ring gaskets PN 12533587. Manifold hold down bolts included. For LS rectangle port (LS3) applications see PN 71196.
Edelbrock is a legendary performance parts manufacturer. It was founded in 1931 by Vic Edelbrock, and has an incredible history of success throughout the last last century.
Edelbrock has over six locations totaling over 600,000 square feet, all in California. Their research and development capabilities are phenomenal. Perhaps more than any other aftermarket automotive brand in the world, Edelbrock is known to be a name brand you can trust.
Edelbrock has over six locations totaling over 600,000 square feet, all in California. Their research and development capabilities are phenomenal. Perhaps more than any other aftermarket automotive brand in the world, Edelbrock is known to be a name brand you can trust.
Q: How do you install an intake manifold?
A: It depends on whether your car is carbureted or fuel injected, but either way, the good news is that it's located on the top end of the engine and therefore is easily accessible and won't require you to mess with any internals to change it out.
Q: What is an intake manifold? Why buy an intake manifold?
A: Air is routed through the air filter, through the throttle body or carburetor, and into the intake manifold. Once the air is inside the intake manifold it's distributed to each of the cylinders in equal parts. In order to increase the capacity of the intake manifold so that it carries more air into the motor for combustion, many people buy performance intake manifolds that incorporate a larger chamber where the air collects into the manifold. More air equals more power. So if you want more horsepower, an intake manifold is a great way to go about getting it.
A: It depends on whether your car is carbureted or fuel injected, but either way, the good news is that it's located on the top end of the engine and therefore is easily accessible and won't require you to mess with any internals to change it out.
Q: What is an intake manifold? Why buy an intake manifold?
A: Air is routed through the air filter, through the throttle body or carburetor, and into the intake manifold. Once the air is inside the intake manifold it's distributed to each of the cylinders in equal parts. In order to increase the capacity of the intake manifold so that it carries more air into the motor for combustion, many people buy performance intake manifolds that incorporate a larger chamber where the air collects into the manifold. More air equals more power. So if you want more horsepower, an intake manifold is a great way to go about getting it.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
Engine Intake Manifold Assembly for Mercedes C230 E350 C/SLK280 ML350 R350 S400
2016 - 2025 Jeep Grand Cherokee 3.6 V6 OEM Complete Intake Manifold | 68490796AA
Dorman OE FIX 615-916 Upgraded Engine Intake Manifold Compatible 15-17 Ford F150
1997-1998 Ford Truck-F150 4.2L Lower Intake Manifold Genuine Assembly OEM
2008-2009 Jeep Grand Cherokee 4.7L Intake Manifold Genuine Assembly OEM
© 1997- Andy's Auto Sport | All Rights Reserved.