EXTERIOR
INTERIOR
LIGHTS
PERFORMANCE
SUSPENSION
BRAKES
DRIVETRAIN
WHEELS
 Select Your Vehicle

 Select Your Vehicle

Edelbrock EDE Performer Intake Manifold - Perf RPM 330-403


Part #: 7111


$481.95 For each
Free Shipping! *to continental U.S. only









Product Details
Fits On:
1979 Pontiac Firebird, 1978 Pontiac Firebird, 1977 Pontiac Firebird, 1974 Chevrolet Camaro, 1973 Chevrolet Camaro, 1972 Chevro... See more

Description:
Edelbrock's part #7111 Performer RPM intake manifold is a high-rise, dual-plane design built for 330-350-403 c.i.d. Oldsmobiles and 1980.5-1985 307 c.i.d. engines with 5A heads (casting #3317). The 180-degree firing order layout targets top-end horsepower without sacrificing throttle response. Port flanges include extra material for use with cast iron 455 heads or Edelbrock Performer RPM heads #60519, and the carb pad accepts square-bore carbs without adapters.
About Edelbrock
Edelbrock is a legendary performance parts manufacturer. It was founded in 1931 by Vic Edelbrock, and has an incredible history of success throughout the last last century.

Edelbrock has over six locations totaling over 600,000 square feet, all in California. Their research and development capabilities are phenomenal. Perhaps more than any other aftermarket automotive brand in the world, Edelbrock is known to be a name brand you can trust.
FAQs
Q: How do you install an intake manifold?
A: It depends on whether your car is carbureted or fuel injected, but either way, the good news is that it's located on the top end of the engine and therefore is easily accessible and won't require you to mess with any internals to change it out.

Q: What is an intake manifold? Why buy an intake manifold?
A: Air is routed through the air filter, through the throttle body or carburetor, and into the intake manifold. Once the air is inside the intake manifold it's distributed to each of the cylinders in equal parts. In order to increase the capacity of the intake manifold so that it carries more air into the motor for combustion, many people buy performance intake manifolds that incorporate a larger chamber where the air collects into the manifold. More air equals more power. So if you want more horsepower, an intake manifold is a great way to go about getting it.

Image Description:
A lot of Edelbrock's success can be traced to its early involvement in midget car racing, where many new Edelbrock parts were tested.
Image Description:
Edelbrock has been making engines faster since flatheads were still new technology!

Image Description:
Edelbrock was one of the first companies to use an engine dynamometer to test performance gains. The Clayton dyno was capable of recording up to 200-horsepower.
Image Description:
Edelbrock's first parts catalog was printed just after WWII, in 1946.

Image Description:
Edelbrock's first purpose-built manufacturing facility in 1949.
Image Description:
Edelbrock's giant campus in Torrance, California houses its design, testing, and manufacturing departments.

Image Description:
Founder of Edelbrock, Vic Edelbrock, Sr.
Image Description:
The infamous Ford flathead Edelbrock Slingshot intake manifold. It was the first to bear the Edelbrock name.

Image Description:
The So Cal Special streamliner used Edelbrock parts through the early 1950s.
Image Description:
Vic Edelbrock, Sr., in his '32 Ford highboy roadster, crossing the timing lights at El Mirage.

Image Description:
Vic with his six-carb Ram Log intake manifold.
Image Description:
Vic, Sr., and his successor, Vic Edelbrock, Jr.

Image Description:
Vic's '32 Ford went 112MPH way back in 1939! It may not sound fast by today's standards, but it paved the way for modern hot rodding.




If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.



Have a question about this product? Click here to email us!




When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Not able to find what you are looking for?

Full Aluminum Lower Intake Manifold For 2011-2020 Chrysler Dodge RAM Jeep V6 3.6

Intake Manifold for Hyundai 2015-2021 2.4L Gas Models 28310-2GGA0

2016 - 2025 Jeep Grand Cherokee 3.6 V6 OEM Complete Intake Manifold | 68490796AA

Chrysler 300 Dodge Charger Magnum 2008 2009 2010 3.5 Upper Intake Manifold OEM

2008-2009 Jeep Grand Cherokee 4.7L Intake Manifold Genuine Assembly OEM

Click here to view more Intake Manifolds on eBay





Popular Categories
Exhaust Systems
Cold Air Intakes
Headlights
Tail Lights
Body Kits
Hoods
Struts and Shocks
Racing Seats
Buick Century Parts
Chevrolet Bel Air Parts
Oldsmobile 88 Parts
Buick Century Intake Manifolds
Chevrolet Bel Air Intake Manifolds
Oldsmobile 88 Intake Manifolds
Performance Sitemap






© 1997- Andy's Auto Sport | All Rights Reserved.