Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Edelbrock EDE Performer-Plus Camshaft - Perf Plus Cam And Lifters Kit Buick V-6 231-252 Even Fire

Part #: 5487
$406.95 For each
Free Shipping! *to continental U.S. only
Fits On:
1981 Pontiac Firebird, 1981 Chevrolet Camaro, 1980 Chevrolet Camaro, 1984 Pontiac Parisienne, 1981 Pontiac LeMans, 1980 Pontia... See more
Description:
Edelbrock's Performer-Plus camshaft (part #5487) is designed for Buick 231-252 Even Fire V-6 engines and delivers optimum torque from low-end to mid-range across an off-idle to 5500 rpm operating range. Specs include 204/214 degrees duration at .050, .448 inches/.472 inches valve lift, and 112-degree lobe separation. Kit includes flat tappet lifters, assembly lube, and instructions. Pairs with Performer intake manifolds.
Edelbrock's Performer-Plus camshaft (part #5487) is designed for Buick 231-252 Even Fire V-6 engines and delivers optimum torque from low-end to mid-range across an off-idle to 5500 rpm operating range. Specs include 204/214 degrees duration at .050, .448 inches/.472 inches valve lift, and 112-degree lobe separation. Kit includes flat tappet lifters, assembly lube, and instructions. Pairs with Performer intake manifolds.
Edelbrock is a legendary performance parts manufacturer. It was founded in 1931 by Vic Edelbrock, and has an incredible history of success throughout the last last century.
Edelbrock has over six locations totaling over 600,000 square feet, all in California. Their research and development capabilities are phenomenal. Perhaps more than any other aftermarket automotive brand in the world, Edelbrock is known to be a name brand you can trust.
Edelbrock has over six locations totaling over 600,000 square feet, all in California. Their research and development capabilities are phenomenal. Perhaps more than any other aftermarket automotive brand in the world, Edelbrock is known to be a name brand you can trust.
Q: What do camshafts do? Why buy camshafts?
A: Air travels through your intake manifold into your intake valves and exhaust valves. By upgrading to more aggressive camshafts on both the intake and exhaust side, it will create greater duration and lift. This means the intake and exhaust valves can remain open longer, which allows for more air to move through the cylinder head efficiently. If you're looking to get more horsepower out of your car, aftermarket camshafts are a great option.
Q: Are camshafts sold individually?
A: Camshafts are sold individually unless otherwise noted in the product description. Single overhead cams (SOHC) utilize one camshaft while dual overhead cam (DOHC) motors utilize two.
Q: How do you install camshafts?
A: Installation should be left to the pros on this one since timing will be involved. If you plan on doing it yourself removal of the upper timing belt cover will need to be done to reveal the cam gears. The valve cover along with the camshafts will need to be removed. Once this is done replace your factory camshafts the aftermarket camshafts and reinstall your cam gears. Make sure when you remove and reinstall the camshafts and cam gears they are at top dead center (TDC). Replace everything as you removed them and re-time your vehicle.
A: Air travels through your intake manifold into your intake valves and exhaust valves. By upgrading to more aggressive camshafts on both the intake and exhaust side, it will create greater duration and lift. This means the intake and exhaust valves can remain open longer, which allows for more air to move through the cylinder head efficiently. If you're looking to get more horsepower out of your car, aftermarket camshafts are a great option.
Q: Are camshafts sold individually?
A: Camshafts are sold individually unless otherwise noted in the product description. Single overhead cams (SOHC) utilize one camshaft while dual overhead cam (DOHC) motors utilize two.
Q: How do you install camshafts?
A: Installation should be left to the pros on this one since timing will be involved. If you plan on doing it yourself removal of the upper timing belt cover will need to be done to reveal the cam gears. The valve cover along with the camshafts will need to be removed. Once this is done replace your factory camshafts the aftermarket camshafts and reinstall your cam gears. Make sure when you remove and reinstall the camshafts and cam gears they are at top dead center (TDC). Replace everything as you removed them and re-time your vehicle.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?


Sloppy Mechanics Stage 2 Cam Lifters Kit For LS1 4.8 5.3 5.7 6.0 6.2 LS +

Comp Cams VVT Cam Phaser Limiter Kit for Chrysler Dodge Jeep 5.7L 6.1L 6.4L Hemi

Stage 1 Camshaft & Lifters for Chevrolet SBC 283 305 327 350 5.7L 420/443 Lift

Intake Exhaust Camshaft for Dodge Jeep Ram ProMaster Chrysler 3.6L 2016-2024

05-11 Ford Explorer 4.0 6cyl Driver Left Camshaft 7L2E-6250-AA OEM

© 1997- Andy's Auto Sport | All Rights Reserved.

















