EXTERIOR
INTERIOR
LIGHTS
PERFORMANCE
SUSPENSION
BRAKES
DRIVETRAIN
WHEELS
 Select Your Vehicle

 Select Your Vehicle

Edelbrock EDE Torker-Plus Camshaft - Torker Plus Cam And Lifters Kit Ford 289-302


Part #: 5022


$440.95 For each
Free Shipping! *to continental U.S. only









Product Details
Fits On:
1980 Mercury Cougar, 1988 Mercury Cougar, 1987 Mercury Cougar, 1986 Mercury Cougar, 1985 Mercury Cougar, 1984 Mercury Cougar, ... See more

Description:
Edelbrock's Torker-Plus Camshaft (part #5022) is a hydraulic flat tappet cam designed for small-block Ford 289-302 V-8 engines, with 214/224 degrees duration at .050 and .472 inches/.496 inches valve lift. It pairs well with Torker II manifolds and targets the 2500-6500 rpm range for street, drag, or marine use. Hydraulic flat tappet lifters are included. Note that this cam produces a slightly rough idle and is not suited for trucks or towing.
About Edelbrock
Edelbrock is a legendary performance parts manufacturer. It was founded in 1931 by Vic Edelbrock, and has an incredible history of success throughout the last last century.

Edelbrock has over six locations totaling over 600,000 square feet, all in California. Their research and development capabilities are phenomenal. Perhaps more than any other aftermarket automotive brand in the world, Edelbrock is known to be a name brand you can trust.
FAQs
Q: How do you install camshafts?
A: Installation should be left to the pros on this one since timing will be involved. If you plan on doing it yourself removal of the upper timing belt cover will need to be done to reveal the cam gears. The valve cover along with the camshafts will need to be removed. Once this is done replace your factory camshafts the aftermarket camshafts and reinstall your cam gears. Make sure when you remove and reinstall the camshafts and cam gears they are at top dead center (TDC). Replace everything as you removed them and re-time your vehicle.

Q: What do camshafts do? Why buy camshafts?
A: Air travels through your intake manifold into your intake valves and exhaust valves. By upgrading to more aggressive camshafts on both the intake and exhaust side, it will create greater duration and lift. This means the intake and exhaust valves can remain open longer, which allows for more air to move through the cylinder head efficiently. If you're looking to get more horsepower out of your car, aftermarket camshafts are a great option.

Q: Are camshafts sold individually?
A: Camshafts are sold individually unless otherwise noted in the product description. Single overhead cams (SOHC) utilize one camshaft while dual overhead cam (DOHC) motors utilize two.

Image Description:
A lot of Edelbrock's success can be traced to its early involvement in midget car racing, where many new Edelbrock parts were tested.
Image Description:
Edelbrock has been making engines faster since flatheads were still new technology!

Image Description:
Edelbrock was one of the first companies to use an engine dynamometer to test performance gains. The Clayton dyno was capable of recording up to 200-horsepower.
Image Description:
Edelbrock's first parts catalog was printed just after WWII, in 1946.

Image Description:
Edelbrock's first purpose-built manufacturing facility in 1949.
Image Description:
Edelbrock's giant campus in Torrance, California houses its design, testing, and manufacturing departments.

Image Description:
Founder of Edelbrock, Vic Edelbrock, Sr.
Image Description:
The infamous Ford flathead Edelbrock Slingshot intake manifold. It was the first to bear the Edelbrock name.

Image Description:
The So Cal Special streamliner used Edelbrock parts through the early 1950s.
Image Description:
Vic Edelbrock, Sr., in his '32 Ford highboy roadster, crossing the timing lights at El Mirage.

Image Description:
Vic with his six-carb Ram Log intake manifold.
Image Description:
Vic, Sr., and his successor, Vic Edelbrock, Jr.

Image Description:
Vic's '32 Ford went 112MPH way back in 1939! It may not sound fast by today's standards, but it paved the way for modern hot rodding.




If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.



Have a question about this product? Click here to email us!




When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Not able to find what you are looking for?

16X Lifters Hydraulic Roller 12499225 For GM LS7 LS1 - LS3 LS6 LQ4 LQ9 LY5 LY6

DS7Z-6250-L OEM FORD CAMSHAFT

Stage 1 Camshaft & Lifters for Chevrolet SBC 283 305 327 350 5.7L 420/443 Lift

For LS Truck Cam Kit Stage 2 Cam Head gasket Pushrods Lifters 4.8 5.3 6.0 6.2L

2015-2023 Mercedes Benz Intake & Exhaust Camshafts - M274 2.0L L4 Turbo

Click here to view more Camshafts on eBay





Popular Categories
Exhaust Systems
Cold Air Intakes
Headlights
Tail Lights
Body Kits
Hoods
Struts and Shocks
Racing Seats
Ford 300 Parts
Lincoln Continental Parts
Mercury Capri Parts
Ford 300 Camshafts
Lincoln Continental Camshafts
Mercury Capri Camshafts
Performance Sitemap




Customer Support
Contact Us
Returns Policy
Orders & Shipping
Terms of Service
About Us
About Andy's
In The Media
30-Day Price Protection
Accessibility
Andy's Parts Smarts
Andy's Auto Sport TV
Customer Rides
The Andy's Dictionary
Knowledge Base
Sales Programs
Coupons
Price Stomp
Car Club Discounts
Wholesale Discounts
Newsletter
Sign up and get FREE access to exclusive coupons, guides, and Andy's TV episodes!


© 1997- Andy's Auto Sport | All Rights Reserved.