1-800-419-1152
Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Edelbrock EDE Performer-Plus Camshaft - Perf Plus Cam And Lifters Kit Chrys 383-440
Part #: 2192
$444.95 For each
Free Shipping! *to continental U.S. only
Fits On:
1978 Plymouth PB300, 1977 Plymouth PB300, 1976 Plymouth PB300, 1974 Dodge B200 Van, 1971 Dodge B200 Van, 1978 Dodge B300, 1977... See more
Description:
Edelbrock's Performer-Plus camshaft kit (part #2192) is designed for 1968 and later big-block Chrysler 383, 400, and 440 V-8 engines. It specs out at 204/214 degrees duration at .050, .420 inches/.442 inches valve lift, and 112-degree lobe separation, with an operating range from off-idle to 5500 rpm. Tested on a 440 with the #2191 intake and stock iron heads, it produced 427 ft-lbs of torque. The kit includes flat tappet lifters, assembly lube, and instructions, and is suited to daily drivers, trucks, vans, RVs, and 4x4s.
Edelbrock's Performer-Plus camshaft kit (part #2192) is designed for 1968 and later big-block Chrysler 383, 400, and 440 V-8 engines. It specs out at 204/214 degrees duration at .050, .420 inches/.442 inches valve lift, and 112-degree lobe separation, with an operating range from off-idle to 5500 rpm. Tested on a 440 with the #2191 intake and stock iron heads, it produced 427 ft-lbs of torque. The kit includes flat tappet lifters, assembly lube, and instructions, and is suited to daily drivers, trucks, vans, RVs, and 4x4s.
Edelbrock is a legendary performance parts manufacturer. It was founded in 1931 by Vic Edelbrock, and has an incredible history of success throughout the last last century.
Edelbrock has over six locations totaling over 600,000 square feet, all in California. Their research and development capabilities are phenomenal. Perhaps more than any other aftermarket automotive brand in the world, Edelbrock is known to be a name brand you can trust.
Edelbrock has over six locations totaling over 600,000 square feet, all in California. Their research and development capabilities are phenomenal. Perhaps more than any other aftermarket automotive brand in the world, Edelbrock is known to be a name brand you can trust.
Q: What do camshafts do? Why buy camshafts?
A: Air travels through your intake manifold into your intake valves and exhaust valves. By upgrading to more aggressive camshafts on both the intake and exhaust side, it will create greater duration and lift. This means the intake and exhaust valves can remain open longer, which allows for more air to move through the cylinder head efficiently. If you're looking to get more horsepower out of your car, aftermarket camshafts are a great option.
Q: How do you install camshafts?
A: Installation should be left to the pros on this one since timing will be involved. If you plan on doing it yourself removal of the upper timing belt cover will need to be done to reveal the cam gears. The valve cover along with the camshafts will need to be removed. Once this is done replace your factory camshafts the aftermarket camshafts and reinstall your cam gears. Make sure when you remove and reinstall the camshafts and cam gears they are at top dead center (TDC). Replace everything as you removed them and re-time your vehicle.
Q: Are camshafts sold individually?
A: Camshafts are sold individually unless otherwise noted in the product description. Single overhead cams (SOHC) utilize one camshaft while dual overhead cam (DOHC) motors utilize two.
A: Air travels through your intake manifold into your intake valves and exhaust valves. By upgrading to more aggressive camshafts on both the intake and exhaust side, it will create greater duration and lift. This means the intake and exhaust valves can remain open longer, which allows for more air to move through the cylinder head efficiently. If you're looking to get more horsepower out of your car, aftermarket camshafts are a great option.
Q: How do you install camshafts?
A: Installation should be left to the pros on this one since timing will be involved. If you plan on doing it yourself removal of the upper timing belt cover will need to be done to reveal the cam gears. The valve cover along with the camshafts will need to be removed. Once this is done replace your factory camshafts the aftermarket camshafts and reinstall your cam gears. Make sure when you remove and reinstall the camshafts and cam gears they are at top dead center (TDC). Replace everything as you removed them and re-time your vehicle.
Q: Are camshafts sold individually?
A: Camshafts are sold individually unless otherwise noted in the product description. Single overhead cams (SOHC) utilize one camshaft while dual overhead cam (DOHC) motors utilize two.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
3.6L Pentastar Camshafts Rockers Lifters Assembly For 11-16 Chrysler Dodge Ram
Comp Cams VVT Cam Phaser Limiter Kit for Chrysler Dodge Jeep 5.7L 6.1L 6.4L Hemi
Camshaft Kit Rocker Arm Lifters For 2016-2024 Jeep Cherokee Dodge Chrysler 3.6L
MOPAR MDS Front 5038785AD+Rear 5038786AD Hydraulic Lifter Yoke For 04-21 RAM 5.7
NEW Mopar Camshaft Kit+Rocker Arm Lifters Fits for RAM Dodge Chrysler Jeep 3.6L
© 1997- Andy's Auto Sport | All Rights Reserved.