EXTERIOR
INTERIOR
LIGHTS
PERFORMANCE
SUSPENSION
BRAKES
DRIVETRAIN
WHEELS
 Select Your Vehicle

 Select Your Vehicle

Edelbrock EDE Performer-Plus Camshaft - Perf Plus Cam And Lifters Kit Chrys 318-360


Part #: 2177


$375.95 For each
Free Shipping! *to continental U.S. only









Product Details
Fits On:
1983 Plymouth PB350, 1982 Plymouth PB350, 1981 Plymouth PB350, 1980 Plymouth PB300, 1979 Plymouth PB300, 1978 Plymouth PB300, ... See more

Description:
Edelbrock's Performer-Plus camshaft kit (part #2177) is designed for small-block Chrysler 318-340-360 V-8 engines and includes flat tappet lifters, assembly lube, and instructions. It features 204 degrees duration at .050 on both intake and exhaust, .420 inches valve lift, and a 110-degree lobe separation, with a power band optimized from off-idle to 5500 rpm. Tested on a 318 with the #2176 intake and stock iron heads, it produced 305 ft-lbs of torque. The smooth idle and strong low-to-mid-range torque make it well suited for daily drivers, trucks, vans, RVs, and 4x4s.
About Edelbrock
Edelbrock is a legendary performance parts manufacturer. It was founded in 1931 by Vic Edelbrock, and has an incredible history of success throughout the last last century.

Edelbrock has over six locations totaling over 600,000 square feet, all in California. Their research and development capabilities are phenomenal. Perhaps more than any other aftermarket automotive brand in the world, Edelbrock is known to be a name brand you can trust.
FAQs
Q: Are camshafts sold individually?
A: Camshafts are sold individually unless otherwise noted in the product description. Single overhead cams (SOHC) utilize one camshaft while dual overhead cam (DOHC) motors utilize two.

Q: How do you install camshafts?
A: Installation should be left to the pros on this one since timing will be involved. If you plan on doing it yourself removal of the upper timing belt cover will need to be done to reveal the cam gears. The valve cover along with the camshafts will need to be removed. Once this is done replace your factory camshafts the aftermarket camshafts and reinstall your cam gears. Make sure when you remove and reinstall the camshafts and cam gears they are at top dead center (TDC). Replace everything as you removed them and re-time your vehicle.

Q: What do camshafts do? Why buy camshafts?
A: Air travels through your intake manifold into your intake valves and exhaust valves. By upgrading to more aggressive camshafts on both the intake and exhaust side, it will create greater duration and lift. This means the intake and exhaust valves can remain open longer, which allows for more air to move through the cylinder head efficiently. If you're looking to get more horsepower out of your car, aftermarket camshafts are a great option.

Image Description:
A lot of Edelbrock's success can be traced to its early involvement in midget car racing, where many new Edelbrock parts were tested.
Image Description:
Edelbrock has been making engines faster since flatheads were still new technology!

Image Description:
Edelbrock was one of the first companies to use an engine dynamometer to test performance gains. The Clayton dyno was capable of recording up to 200-horsepower.
Image Description:
Edelbrock's first parts catalog was printed just after WWII, in 1946.

Image Description:
Edelbrock's first purpose-built manufacturing facility in 1949.
Image Description:
Edelbrock's giant campus in Torrance, California houses its design, testing, and manufacturing departments.

Image Description:
Founder of Edelbrock, Vic Edelbrock, Sr.
Image Description:
The infamous Ford flathead Edelbrock Slingshot intake manifold. It was the first to bear the Edelbrock name.

Image Description:
The So Cal Special streamliner used Edelbrock parts through the early 1950s.
Image Description:
Vic Edelbrock, Sr., in his '32 Ford highboy roadster, crossing the timing lights at El Mirage.

Image Description:
Vic with his six-carb Ram Log intake manifold.
Image Description:
Vic, Sr., and his successor, Vic Edelbrock, Jr.

Image Description:
Vic's '32 Ford went 112MPH way back in 1939! It may not sound fast by today's standards, but it paved the way for modern hot rodding.




If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.



Have a question about this product? Click here to email us!




When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Not able to find what you are looking for?

16X Lifters Hydraulic Roller 12499225 For GM LS7 LS1 - LS3 LS6 LQ4 LQ9 LY5 LY6

Hydraulic Lifters Complete SET Front & Back OEM Mopar 2X 5038785AD 2X 5038786AD

DS7Z-6250-L OEM FORD CAMSHAFT

Stage 1 Camshaft & Lifters for Chevrolet SBC 283 305 327 350 5.7L 420/443 Lift

COMP Cams 12-242-2 Xtreme Energy 268H Hyd Camshaft for Chevrolet SBC 305 350 5.7

Click here to view more Camshafts on eBay





Popular Categories
Exhaust Systems
Cold Air Intakes
Headlights
Tail Lights
Body Kits
Hoods
Struts and Shocks
Racing Seats
Checker Marathon Parts
Chrysler Cordoba Parts
Dodge 330 Parts
Checker Marathon Camshafts
Chrysler Cordoba Camshafts
Dodge 330 Camshafts
Performance Sitemap






© 1997- Andy's Auto Sport | All Rights Reserved.