EXTERIOR
INTERIOR
LIGHTS
PERFORMANCE
SUSPENSION
BRAKES
DRIVETRAIN
WHEELS
 Select Your Vehicle

 Select Your Vehicle

Edelbrock EDE Performer Camshaft - Camshaft Performer Chevrolet Small Block E-Street EFI


Part #: 2117


$306.95 For each
Free Shipping! *to continental U.S. only









Product Details
Fits On:
1980 Mercury Cougar, 1986 Mercury Cougar, 1985 Mercury Cougar, 1984 Mercury Cougar, 1983 Mercury Cougar, 1981 Mercury Cougar, ... See more

Description:
Edelbrock's Performer-Plus Camshaft #2117 is a flat-tappet hydraulic cam designed for 283-400 Chevy V8 engines from 1957-86, with 218/224 degrees of duration and .464 inches/.470 inches lift on a 114-degree lobe separation. It targets low-to-mid-range torque in a street-friendly package suited to daily drivers, trucks, vans, RVs, and 4x4s operating from off-idle to 5500 rpm. Flat tappet lifters, assembly lube, and instructions are included. Best matched with Edelbrock Performer intake manifolds for the full torque benefit.
About Edelbrock
Edelbrock is a legendary performance parts manufacturer. It was founded in 1931 by Vic Edelbrock, and has an incredible history of success throughout the last last century.

Edelbrock has over six locations totaling over 600,000 square feet, all in California. Their research and development capabilities are phenomenal. Perhaps more than any other aftermarket automotive brand in the world, Edelbrock is known to be a name brand you can trust.
FAQs
Q: How do you install camshafts?
A: Installation should be left to the pros on this one since timing will be involved. If you plan on doing it yourself removal of the upper timing belt cover will need to be done to reveal the cam gears. The valve cover along with the camshafts will need to be removed. Once this is done replace your factory camshafts the aftermarket camshafts and reinstall your cam gears. Make sure when you remove and reinstall the camshafts and cam gears they are at top dead center (TDC). Replace everything as you removed them and re-time your vehicle.

Q: Are camshafts sold individually?
A: Camshafts are sold individually unless otherwise noted in the product description. Single overhead cams (SOHC) utilize one camshaft while dual overhead cam (DOHC) motors utilize two.

Q: What do camshafts do? Why buy camshafts?
A: Air travels through your intake manifold into your intake valves and exhaust valves. By upgrading to more aggressive camshafts on both the intake and exhaust side, it will create greater duration and lift. This means the intake and exhaust valves can remain open longer, which allows for more air to move through the cylinder head efficiently. If you're looking to get more horsepower out of your car, aftermarket camshafts are a great option.

Image Description:
A lot of Edelbrock's success can be traced to its early involvement in midget car racing, where many new Edelbrock parts were tested.
Image Description:
Edelbrock has been making engines faster since flatheads were still new technology!

Image Description:
Edelbrock was one of the first companies to use an engine dynamometer to test performance gains. The Clayton dyno was capable of recording up to 200-horsepower.
Image Description:
Edelbrock's first parts catalog was printed just after WWII, in 1946.

Image Description:
Edelbrock's first purpose-built manufacturing facility in 1949.
Image Description:
Edelbrock's giant campus in Torrance, California houses its design, testing, and manufacturing departments.

Image Description:
Founder of Edelbrock, Vic Edelbrock, Sr.
Image Description:
The infamous Ford flathead Edelbrock Slingshot intake manifold. It was the first to bear the Edelbrock name.

Image Description:
The So Cal Special streamliner used Edelbrock parts through the early 1950s.
Image Description:
Vic Edelbrock, Sr., in his '32 Ford highboy roadster, crossing the timing lights at El Mirage.

Image Description:
Vic with his six-carb Ram Log intake manifold.
Image Description:
Vic, Sr., and his successor, Vic Edelbrock, Jr.

Image Description:
Vic's '32 Ford went 112MPH way back in 1939! It may not sound fast by today's standards, but it paved the way for modern hot rodding.




If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.



Have a question about this product? Click here to email us!




When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Not able to find what you are looking for?

GM LS7 Lifters & Guide Trays For Chevy GMC LS/LQ 4.8 5.3L 5.7L 6.0L 6.2L

Chevy SBC 350 Hydraulic Roller Camshaft 218 Int. 224 Exh. Duration - PCE249.1011

AFM Deleted Kit Camshaft Lifters Kit for 2007-2013 Chevrolet GMC 5.3L Truck/SUV

Engine Camshaft-R/T, VIN: T Mopar 53022372AA

Sloppy Stage 2 Cam Lifters Oil Pump Pushrods Kit For LS1 4.8 5.3 5.7 6.0 6.2 LS

Click here to view more Camshafts on eBay





Popular Categories
Exhaust Systems
Cold Air Intakes
Headlights
Tail Lights
Body Kits
Hoods
Struts and Shocks
Racing Seats
Ford 300 Parts
Lincoln Continental Parts
Mercury Capri Parts
Ford 300 Camshafts
Lincoln Continental Camshafts
Mercury Capri Camshafts
Performance Sitemap




Customer Support
Contact Us
Returns Policy
Orders & Shipping
Terms of Service
About Us
About Andy's
In The Media
30-Day Price Protection
Accessibility
Andy's Parts Smarts
Andy's Auto Sport TV
Customer Rides
The Andy's Dictionary
Knowledge Base
Sales Programs
Coupons
Price Stomp
Car Club Discounts
Wholesale Discounts
Newsletter
Sign up and get FREE access to exclusive coupons, guides, and Andy's TV episodes!


© 1997- Andy's Auto Sport | All Rights Reserved.