1-800-419-1152

Contact

Andy's Parts Smarts

Cart

Hello, Sign In!

Home

Turbos And Superchargers

Supercharger Kits

Edelbrock

Product Detail

Select Your Vehicle

Edelbrock EDE Supercharger - SC 2015 Ford F-150 5.0L V8 Engines

Part #: 1557

This is the lowest price you'll find or we'll sell it to you at cost here.

$9,572.95 For each

Add to Wishlist

No-Hassle Returns

Seeproduct details

Product Details

Fits On:

2015 Ford F-150, 2016 Ford F-150, 2017 Ford F-150

Description:
Edelbrock's Stage 1 Street Supercharger kit (part #1557) fits 2015-17 Ford F-150 5.0L 4V engines and raises output to 533 hp and 482 ft-lbs of torque at the rear wheels. The Eaton Gen VI 2650 TVS rotating assembly uses a four-lobe, 170-degree-twist design for strong flow and quiet operation, backed by an air-to-water intercooler and integrated bypass valve to reduce parasitic loss at light throttle. The kit is 50-state emissions legal; the included tune is calibrated for stock vehicles with a cat-back exhaust as the only permitted modification.

FAQs

Q: What does a supercharger kit do? Why buy a supercharger?
A: A supercharger is a form of forced induction. Superchargers offer perhaps the most dramatic increase in horsepower to your car of any aftermarket products. By compressing the air, it lets the engine stuff more air into a cylinder. More air means that more fuel can be stuffed in, too, so you get more power from each explosion in each cylinder. A supercharger's power supply comes from a belt that connects directly to the engine. It gets its power the same way that your water pump or alternator does.

Q: How do you install a supercharger?
A: Superchargers are vehicle-specific, and they will come with everything needed for a direct bolt-on.

Q: Does a supercharger kit come with everything you need? Or is there a pre-condition my vehicle needs to meet in order to be able to handle a supercharger kit?
A: When purchasing a supercharger setup they are vehicle specific which means it will come with everything needed for a direct bolt-on. If you're looking to up the boost past the stock 6 to 8 psi that it comes with stock other modifications will need to be made.

Image Description:

A lot of Edelbrock's success can be traced to its early involvement in midget car racing, where many new Edelbrock parts were tested.

Image Description:

Edelbrock has been making engines faster since flatheads were still new technology!

Image Description:

Edelbrock was one of the first companies to use an engine dynamometer to test performance gains. The Clayton dyno was capable of recording up to 200-horsepower.

Image Description:

Edelbrock's first parts catalog was printed just after WWII, in 1946.

Image Description:

Edelbrock's first purpose-built manufacturing facility in 1949.

Image Description:

Edelbrock's giant campus in Torrance, California houses its design, testing, and manufacturing departments.

Image Description:

Founder of Edelbrock, Vic Edelbrock, Sr.

Image Description:

The infamous Ford flathead Edelbrock Slingshot intake manifold. It was the first to bear the Edelbrock name.

Image Description:

The So Cal Special streamliner used Edelbrock parts through the early 1950s.

Image Description:

Vic Edelbrock, Sr., in his '32 Ford highboy roadster, crossing the timing lights at El Mirage.

Image Description:

Vic with his six-carb Ram Log intake manifold.

Image Description:

Vic, Sr., and his successor, Vic Edelbrock, Jr.

Image Description:

Vic's '32 Ford went 112MPH way back in 1939! It may not sound fast by today's standards, but it paved the way for modern hot rodding.

If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.

Have a question about this product? Click here to email us!

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Not able to find what you are looking for?