1-800-419-1152
Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Clutch Masters CM Steel Flywheels - M3 4.0L/11-16 BMW F10 M5 4.4L 7-Spd DCT Steel Flywheel W/Sprung Hub
Part #: DCT-148-SF
$1,900.00
$1,710.00
For each
For each
Free Shipping! *to continental U.S. only
Fits On:
2006 BMW M3, 2008 BMW M3, 2009 BMW M3, 2010 BMW M3, 2011 BMW M3, 2012 BMW M3, 2013 BMW M3
Description:
Clutch Masters' steel flywheel for the BMW F10 M5 4.4L and M3 4.0L DCT replaces the heavy factory dual-mass unit with a lightweight sprung-hub design that dampens vibration between the engine and transmission. The integrated dampened hub protects the DCT's clutch baskets, which are known to crack with rigid, non-dampened flywheels. The reduced rotating mass allows quicker shifts and faster revs while retaining dampening for street stop-and-go use.
Clutch Masters' steel flywheel for the BMW F10 M5 4.4L and M3 4.0L DCT replaces the heavy factory dual-mass unit with a lightweight sprung-hub design that dampens vibration between the engine and transmission. The integrated dampened hub protects the DCT's clutch baskets, which are known to crack with rigid, non-dampened flywheels. The reduced rotating mass allows quicker shifts and faster revs while retaining dampening for street stop-and-go use.
Clutch Masters aluminum flywheels offer a substantial reduction in rotating weight, resulting in a quicker-reving motor with great response.
Typical benefits of a lightweight flywheel for various engine types:
* Reduced mass equals increased acceleration.
* A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag.
* Increased supercharger efficiency due to less parasitic drag on the crank.
* Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel.
* CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels.
* CM uses High Carbon steel for the friction surface.
* CM uses an OEM steel ring gear secured by bolts.
* CM offers a limited lifetime warranty.
* CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2
Typical benefits of a lightweight flywheel for various engine types:
* Reduced mass equals increased acceleration.
* A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag.
* Increased supercharger efficiency due to less parasitic drag on the crank.
* Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel.
* CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels.
* CM uses High Carbon steel for the friction surface.
* CM uses an OEM steel ring gear secured by bolts.
* CM offers a limited lifetime warranty.
* CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2
Q: How do you install a flywheel?
A: We recommend professional installation since dropping the transmission or whole motor is usually needed. Once the transmission is off of the block, you can go ahead and remove your clutch setup and flywheel. Replace the factory flywheel with your aftermarket one, and re-install the clutch. (Buying a new clutch is a good idea at this point since it needs to be taken off anyway.)
Q: What does a flywheel do? Why buy a flywheel?
A: A flywheel is a component of your clutch assembly, and can make a huge difference in how your car responds when you press the gas pedal. Lightened flywheels are made out of aluminum or chromoly, which reduces the rotating mass by dramatically trimming weight as compared to your heavy factory OEM flywheel. Because the lighter flywheel has less inertia, the engine doesn't need that much torque (power) to spin the flywheel to reach the certain rpm. The result is your car's rpm will increase faster. Additionally, the reduced weight alone will give you a bump in power.
A: We recommend professional installation since dropping the transmission or whole motor is usually needed. Once the transmission is off of the block, you can go ahead and remove your clutch setup and flywheel. Replace the factory flywheel with your aftermarket one, and re-install the clutch. (Buying a new clutch is a good idea at this point since it needs to be taken off anyway.)
Q: What does a flywheel do? Why buy a flywheel?
A: A flywheel is a component of your clutch assembly, and can make a huge difference in how your car responds when you press the gas pedal. Lightened flywheels are made out of aluminum or chromoly, which reduces the rotating mass by dramatically trimming weight as compared to your heavy factory OEM flywheel. Because the lighter flywheel has less inertia, the engine doesn't need that much torque (power) to spin the flywheel to reach the certain rpm. The result is your car's rpm will increase faster. Additionally, the reduced weight alone will give you a bump in power.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
1PC SBC 168T FLYWHEEL
XTD PRO-LITE FLYWHEEL FITS 2007-2012 NISSAN SENTRA CUBE VERSA 1.8L 2.0L S SL
JEGS Flywheel for 1970-1980 Small Block Chevy 400, 168-Tooth [Externally
JEGS Flywheel for 1970-1990 Big Block Chevy 454, 168-Tooth [Externally Balanced]
TMV - 310FW5113 - Flywheel Weights, 13oz.
© 1997- Andy's Auto Sport | All Rights Reserved.