1-800-419-1152
Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Action Clutch AON Flywheel - Aluminum - 2.3L Aluminum Lightweight Flywheel
Part #: ACR-102602-11-AL
$585.68 For each
Fits On:
1989 Merkur XR4Ti, 1988 Merkur XR4Ti, 1987 Merkur XR4Ti, 1986 Merkur XR4Ti, 1985 Merkur XR4Ti, 1994 Ford Ranger, 1993 Ford Ran... See more
Description:
Action Clutch's AON Flywheel is machined from 6061-T6 and 2024-T3 aluminum with a hardened steel ring gear, delivering up to 60% weight reduction over stock. The lighter rotating mass improves throttle response and shift speed while heat-treated friction plates help extend clutch life.
Action Clutch's AON Flywheel is machined from 6061-T6 and 2024-T3 aluminum with a hardened steel ring gear, delivering up to 60% weight reduction over stock. The lighter rotating mass improves throttle response and shift speed while heat-treated friction plates help extend clutch life.
Q: How do you install a flywheel?
A: We recommend professional installation since dropping the transmission or whole motor is usually needed. Once the transmission is off of the block, you can go ahead and remove your clutch setup and flywheel. Replace the factory flywheel with your aftermarket one, and re-install the clutch. (Buying a new clutch is a good idea at this point since it needs to be taken off anyway.)
Q: What does a flywheel do? Why buy a flywheel?
A: A flywheel is a component of your clutch assembly, and can make a huge difference in how your car responds when you press the gas pedal. Lightened flywheels are made out of aluminum or chromoly, which reduces the rotating mass by dramatically trimming weight as compared to your heavy factory OEM flywheel. Because the lighter flywheel has less inertia, the engine doesn't need that much torque (power) to spin the flywheel to reach the certain rpm. The result is your car's rpm will increase faster. Additionally, the reduced weight alone will give you a bump in power.
A: We recommend professional installation since dropping the transmission or whole motor is usually needed. Once the transmission is off of the block, you can go ahead and remove your clutch setup and flywheel. Replace the factory flywheel with your aftermarket one, and re-install the clutch. (Buying a new clutch is a good idea at this point since it needs to be taken off anyway.)
Q: What does a flywheel do? Why buy a flywheel?
A: A flywheel is a component of your clutch assembly, and can make a huge difference in how your car responds when you press the gas pedal. Lightened flywheels are made out of aluminum or chromoly, which reduces the rotating mass by dramatically trimming weight as compared to your heavy factory OEM flywheel. Because the lighter flywheel has less inertia, the engine doesn't need that much torque (power) to spin the flywheel to reach the certain rpm. The result is your car's rpm will increase faster. Additionally, the reduced weight alone will give you a bump in power.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
Vintage Early Chrysler Hemi Flywheel 331 354 392 Manual Transmission
Flywheel Fit For Suzuki Ertiga 2018-2022 Model 12620M72R01 Oem Genuine
ACT Flywheel For Honda CRX 1989 1990 1991 | XACT Streetlite
NEW Flywheel 51701277 292 20301 Teeth: 152 Mounting Holes: 8, Steel
GHIBLI 2015 Flywheel/Flex Plate 90027
© 1997- Andy's Auto Sport | All Rights Reserved.