1-800-419-1152
Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Action Clutch AON Flywheel - Aluminum - 1.4L Aluminum Lightweight Flywheel
Part #: ACR-101223-11-AL
$618.35 For each
Fits On:
2011 Chevrolet Cruze, 2013 Chevrolet Cruze, 2012 Chevrolet Cruze, 2014 Chevrolet Cruze
Description:
Action Clutch's AON Flywheel is machined from 6061-T6 and 2024-T3 aluminum with a hardened steel ring gear, delivering up to 60% weight reduction over stock. The lighter rotating mass improves throttle response and shift speed while heat-treated friction plates help extend clutch life.
Action Clutch's AON Flywheel is machined from 6061-T6 and 2024-T3 aluminum with a hardened steel ring gear, delivering up to 60% weight reduction over stock. The lighter rotating mass improves throttle response and shift speed while heat-treated friction plates help extend clutch life.
Q: How do you install a flywheel?
A: We recommend professional installation since dropping the transmission or whole motor is usually needed. Once the transmission is off of the block, you can go ahead and remove your clutch setup and flywheel. Replace the factory flywheel with your aftermarket one, and re-install the clutch. (Buying a new clutch is a good idea at this point since it needs to be taken off anyway.)
Q: What does a flywheel do? Why buy a flywheel?
A: A flywheel is a component of your clutch assembly, and can make a huge difference in how your car responds when you press the gas pedal. Lightened flywheels are made out of aluminum or chromoly, which reduces the rotating mass by dramatically trimming weight as compared to your heavy factory OEM flywheel. Because the lighter flywheel has less inertia, the engine doesn't need that much torque (power) to spin the flywheel to reach the certain rpm. The result is your car's rpm will increase faster. Additionally, the reduced weight alone will give you a bump in power.
A: We recommend professional installation since dropping the transmission or whole motor is usually needed. Once the transmission is off of the block, you can go ahead and remove your clutch setup and flywheel. Replace the factory flywheel with your aftermarket one, and re-install the clutch. (Buying a new clutch is a good idea at this point since it needs to be taken off anyway.)
Q: What does a flywheel do? Why buy a flywheel?
A: A flywheel is a component of your clutch assembly, and can make a huge difference in how your car responds when you press the gas pedal. Lightened flywheels are made out of aluminum or chromoly, which reduces the rotating mass by dramatically trimming weight as compared to your heavy factory OEM flywheel. Because the lighter flywheel has less inertia, the engine doesn't need that much torque (power) to spin the flywheel to reach the certain rpm. The result is your car's rpm will increase faster. Additionally, the reduced weight alone will give you a bump in power.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
✅ 1989 - 2001 Honda CR500 Flywheel
JEGS 601255 Flywheel
Electric Start Motor Kit for Dongfa Outboard 2 Stroke 30HP/25HP 60cm w/ Flywheel
Detroit Diesel A4710307905 Freightliner flywheel dd13 & dd15 NEW, GENUINE, OEM
2018 Polaris Sportsman 570 Flywheel Assembly 522
© 1997- Andy's Auto Sport | All Rights Reserved.