1-800-419-1152
Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Action Clutch AON Flywheel - Chromoly - 1.3L (13B-RE) Turbo Chromoly Lightweight Flywheel
Part #: AC121FW
$340.00 For each
Fits On:
1991 Mazda RX-7, 1990 Mazda RX-7, 1989 Mazda RX-7, 1988 Mazda RX-7, 1987 Mazda RX-7, 1986 Mazda RX-7, 1995 Mazda RX-7, 1994 Ma... See more
Description:
Action Clutch's AON Chromoly Lightweight Flywheel is heat-treated chromoly steel rated to 18,000 RPM for street and race use on the 1.3L 13B-RE Turbo. The reduced rotational mass improves engine response and thermal capacity, and the friction surface is resurfacable. Note that reduced rotational mass may introduce additional noise, vibration, and harshness over stock.
Action Clutch's AON Chromoly Lightweight Flywheel is heat-treated chromoly steel rated to 18,000 RPM for street and race use on the 1.3L 13B-RE Turbo. The reduced rotational mass improves engine response and thermal capacity, and the friction surface is resurfacable. Note that reduced rotational mass may introduce additional noise, vibration, and harshness over stock.
Q: What does a flywheel do? Why buy a flywheel?
A: A flywheel is a component of your clutch assembly, and can make a huge difference in how your car responds when you press the gas pedal. Lightened flywheels are made out of aluminum or chromoly, which reduces the rotating mass by dramatically trimming weight as compared to your heavy factory OEM flywheel. Because the lighter flywheel has less inertia, the engine doesn't need that much torque (power) to spin the flywheel to reach the certain rpm. The result is your car's rpm will increase faster. Additionally, the reduced weight alone will give you a bump in power.
Q: How do you install a flywheel?
A: We recommend professional installation since dropping the transmission or whole motor is usually needed. Once the transmission is off of the block, you can go ahead and remove your clutch setup and flywheel. Replace the factory flywheel with your aftermarket one, and re-install the clutch. (Buying a new clutch is a good idea at this point since it needs to be taken off anyway.)
A: A flywheel is a component of your clutch assembly, and can make a huge difference in how your car responds when you press the gas pedal. Lightened flywheels are made out of aluminum or chromoly, which reduces the rotating mass by dramatically trimming weight as compared to your heavy factory OEM flywheel. Because the lighter flywheel has less inertia, the engine doesn't need that much torque (power) to spin the flywheel to reach the certain rpm. The result is your car's rpm will increase faster. Additionally, the reduced weight alone will give you a bump in power.
Q: How do you install a flywheel?
A: We recommend professional installation since dropping the transmission or whole motor is usually needed. Once the transmission is off of the block, you can go ahead and remove your clutch setup and flywheel. Replace the factory flywheel with your aftermarket one, and re-install the clutch. (Buying a new clutch is a good idea at this point since it needs to be taken off anyway.)
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
1977 Fiat 124 Spider 1.8L Flywheel 10mm 215mm OEM Used
JEGS Flywheel for 1970-1980 Small Block Chevy 400, 168-Tooth [Externally
Automatic Dual Mass DSG Flywheel for Audi A3 Quattro VW Beetle Jetta 2010-2016
XTD 16LBS X-LITE FLYWHEEL KIT FITS Honda Civic Accord 1.5 Turbo 6MT 2016-2021
2006 Dodge Ram 2500 3500 Flywheel 5.9L M/t Manual Transmission 2WD G56 5.9
© 1997- Andy's Auto Sport | All Rights Reserved.