Contact    Andy's Parts Smarts    Cart

Please be sure to read and understand this Installation Instruction prior to begin installation. Be sure to pre-fit prior to painting and installing the part.

Note 1: Some items may require work such as drilling holes or sanding to install.

Note 2: Be sure to use protective clothing such as long sleeve shirt, gloves, goggles.

If not supplied with your new side skirts, you are going to need the following for the installation: Tapping Screws, Small Screws, Speed Nuts, Installation Hardware, Rivets.

Removal Procedure
To remove your old side skirts, unscrew all of the bolts at the ends. Now locate the plastic grommets on the side skirts and remove them. You may need to break them to get them off, now the part should just come off the car. You will replace theold grommets with ones provided with your side skirts. If none are provided, you can purchase some at your local automotive parts store. Clean any grease, oil, dirt, etc. from the area. Dish soap works fine.

Installation Procedure
Now test fit the side skirt to make sure that it fits properly. You may need to make slight modifications to line it up for a secure fit. if there are no pre-drilled screw holes on the side skirt make them now. Once you are done modifying the parts and they are a good fit, take the parts to a local auto paint shop. Make sure you do not install the side skirts prior to painting them. If you do and they do not fit correctly, you will need to repaint them after making modifications to them. After the side skirts are painted and dry, fit them onto the body of the vehicle. If you do not have existing holes to attach the new side skirts to your car, you will need to drill new ones now. Just be careful when drilling near the newly painted parts, dust can attach itself to them. Once drilling is complete, use the supplied tapping screws to install the side skirt.Check loose screws periodically and tighten them.