EXTERIOR
INTERIOR
LIGHTS
PERFORMANCE
SUSPENSION
BRAKES
DRIVETRAIN
WHEELS


International Havester Recalls

INTERNATIONAL HARVESTER: SCOUT: SEAT BELTS:FRONT

NHTSA Campaign Number: 80V131000
Vehicle/Equipment Make: INTERNATIONAL HARVESTER
Vehicle/Equipment Model: SCOUT
Model Year: 1979
Manufacturer Component Description: SEAT BELTS:FRONT
Manufacturers Involved in Recall: INTERNATIONAL TRUCK & ENGINE CORPORATION
Manufacturered: 19770501 - 19790701
Type of Report: V (Vehicle, Equipment or Tire)
Potential Number of Units Affected: 2200
Date Owner Notified By Manufacturer: 19801118
Recall Initiated By: MFR
Manufacturer Responsible For Recall: INTERNATIONAL HARVESTER
Report Received Date: 19801018
Record Creation Date: 19801112

Defect Summary:

THE SEAT BELTS MAY BE CUT BY AN INNER REINFORCEMENT OF THE FRONT SEAT FRAME, AND MAY SEVER ON SEVERE IMPACT.

Corrective Summary:

THE DEALER WILL APPLY A PROTECTIVE COVERING TO THE REINFORCEMENT EDGE AT THE DRIVER"S INBOARD AND PASSENGER"S OUTBOARD SEAT FRAME AT NO CHARGE TO OWNER.

Notes:

VEHICLE DESCRIPTION: TRUCKS.SYSTEM: INTERIOR; SEAT BELTS.CONSEQUENCES OF DEFECT: THE DRIVER OR PASSENGER MAY NOT BE RESTRAINED IN THEVEHICLE IN THE EVENT OF A SEVERE IMPACT, WHICH CAN RESULT IN PERSONAL INJURY TOTHE DRIVER AND/OR PASSENGER.

INTERNATIONAL HARVESTER: SCOUT: SEAT BELTS:FRONT

NHTSA Campaign Number: 80V131000
Vehicle/Equipment Make: INTERNATIONAL HARVESTER
Vehicle/Equipment Model: SCOUT
Model Year: 1978
Manufacturer Component Description: SEAT BELTS:FRONT
Manufacturers Involved in Recall: INTERNATIONAL TRUCK & ENGINE CORPORATION
Manufacturered: 19770501 - 19790701
Type of Report: V (Vehicle, Equipment or Tire)
Potential Number of Units Affected: 2200
Date Owner Notified By Manufacturer: 19801118
Recall Initiated By: MFR
Manufacturer Responsible For Recall: INTERNATIONAL HARVESTER
Report Received Date: 19801018
Record Creation Date: 19801112

Defect Summary:

THE SEAT BELTS MAY BE CUT BY AN INNER REINFORCEMENT OF THE FRONT SEAT FRAME, AND MAY SEVER ON SEVERE IMPACT.

Corrective Summary:

THE DEALER WILL APPLY A PROTECTIVE COVERING TO THE REINFORCEMENT EDGE AT THE DRIVER"S INBOARD AND PASSENGER"S OUTBOARD SEAT FRAME AT NO CHARGE TO OWNER.

Notes:

VEHICLE DESCRIPTION: TRUCKS.SYSTEM: INTERIOR; SEAT BELTS.CONSEQUENCES OF DEFECT: THE DRIVER OR PASSENGER MAY NOT BE RESTRAINED IN THEVEHICLE IN THE EVENT OF A SEVERE IMPACT, WHICH CAN RESULT IN PERSONAL INJURY TOTHE DRIVER AND/OR PASSENGER.

INTERNATIONAL HARVESTER: SCOUT: SEAT BELTS:FRONT

NHTSA Campaign Number: 80V131000
Vehicle/Equipment Make: INTERNATIONAL HARVESTER
Vehicle/Equipment Model: SCOUT
Model Year: 1977
Manufacturer Component Description: SEAT BELTS:FRONT
Manufacturers Involved in Recall: INTERNATIONAL TRUCK & ENGINE CORPORATION
Manufacturered: 19770501 - 19790701
Type of Report: V (Vehicle, Equipment or Tire)
Potential Number of Units Affected: 2200
Date Owner Notified By Manufacturer: 19801118
Recall Initiated By: MFR
Manufacturer Responsible For Recall: INTERNATIONAL HARVESTER
Report Received Date: 19801018
Record Creation Date: 19801112

Defect Summary:

THE SEAT BELTS MAY BE CUT BY AN INNER REINFORCEMENT OF THE FRONT SEAT FRAME, AND MAY SEVER ON SEVERE IMPACT.

Corrective Summary:

THE DEALER WILL APPLY A PROTECTIVE COVERING TO THE REINFORCEMENT EDGE AT THE DRIVER"S INBOARD AND PASSENGER"S OUTBOARD SEAT FRAME AT NO CHARGE TO OWNER.

Notes:

VEHICLE DESCRIPTION: TRUCKS.SYSTEM: INTERIOR; SEAT BELTS.CONSEQUENCES OF DEFECT: THE DRIVER OR PASSENGER MAY NOT BE RESTRAINED IN THEVEHICLE IN THE EVENT OF A SEVERE IMPACT, WHICH CAN RESULT IN PERSONAL INJURY TOTHE DRIVER AND/OR PASSENGER.

INTERNATIONAL HARVESTER: SCOUT: SEAT BELTS:FRONT:ANCHORAGE

NHTSA Campaign Number: 69V124000
Vehicle/Equipment Make: NAVISTAR INTL CORP.
Vehicle/Equipment Model: SCOUT
Model Year: 1969
Manufacturer Component Description: SEAT BELTS:FRONT:ANCHORAGE
Manufacturers Involved in Recall: INTERNATIONAL TRUCK & ENGINE CORPORATION
Type of Report: V (Vehicle, Equipment or Tire)
Potential Number of Units Affected: 592
Date Owner Notified By Manufacturer: 19690911
Recall Initiated By: MFR
Manufacturer Responsible For Recall: NAVISTAR INTL CORP.
Report Received Date: 19690916
Record Creation Date: 19791012

Notes:

POSSIBILITY THAT FRONT SEAT BELT ANCHOR BOLTS MAY NOT MEET 9000 LBS.MINIMUMBOLT STRENGTH.(COR- RECT BY REPLACING WITH PROPER STRENGTH BOLTS.)

INTERNATIONAL HARVESTER: SCOUT: STEERING:LINKAGES

NHTSA Campaign Number: 67V039000
Vehicle/Equipment Make: NAVISTAR INTL CORP.
Vehicle/Equipment Model: SCOUT
Model Year: 1967
Manufacturer Component Description: STEERING:LINKAGES
Manufacturers Involved in Recall: INTERNATIONAL TRUCK & ENGINE CORPORATION
Type of Report: V (Vehicle, Equipment or Tire)
Potential Number of Units Affected: 12
Date Owner Notified By Manufacturer: 19670410
Recall Initiated By: MFR
Manufacturer Responsible For Recall: NAVISTAR INTL CORP.
Report Received Date: 19670411
Record Creation Date: 19791012

Notes:

POSSIBILITY THAT THE STEERING GEAR LEVER (PITMAN ARM) RETAINING BOLT MAY NOT BE TORQUED SUFFICIENTLY.(INSPECT AND RETORQUE THE BOLT ON THE SUBJECT VEHICLES.)

INTERNATIONAL HARVESTER: SCOUT SERIES: WHEELS

NHTSA Campaign Number: 80V029000
Vehicle/Equipment Make: INTERNATIONAL HARVESTER
Vehicle/Equipment Model: SCOUT SERIES
Model Year: 1980
Manufacturer Component Description: WHEELS
Manufacturers Involved in Recall: INTERNATIONAL TRUCK & ENGINE CORPORATION
Manufacturered: 19790701 - 19791101
Type of Report: V (Vehicle, Equipment or Tire)
Potential Number of Units Affected: 1633
Date Owner Notified By Manufacturer: 19800324
Recall Initiated By: MFR
Manufacturer Responsible For Recall: INTERNATIONAL HARVESTER
Report Received Date: 19800319
Record Creation Date: 19800331

Defect Summary:

VEHICLES MAY HAVE MOUNTING STUDS WHICH WERE NOT SEATED FLUSH WITH THE ROTOR FACE AND LUG NUTS THAT MAY NOT BE SUFFICIENT TO SEAT THOSE STUDS. WHEEL LOOSENING CAN RESULT AND CONTINUED OPERATION COULD ALLOW THE WHEEL TO DISENGAGE FROM THE VEHICLE.

Corrective Summary:

LUG NUTS WILL BE TIGHTENED TO SPECIFICATIONS AT NO CHARGE TO OWNERS.

Notes:

VEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: SUSPENSION; FRONT WHEEL MOUNTING.CONSEQUENCES OF DEFECT: LOSS OF VEHICLE CONTROL AND AN ACCIDENT COULD RESULT.NOTE: A FAILURE WARNING WILL OCCUR IN THE FORM OF NOISE FROM THE LOOSE WHEELAND WHEEL WOBBLE. AS A PRECAUTION, THE WHEEL MOUNTING NUT TIGHTENINGINSTRUCTIONS CONTAINED IN THE OWNER"S MANUAL SHOULD BE FOLLOWED.

-

INTERNATIONAL HARVESTER: SCOUT SERIES: VISIBILITY:WINDSHIELD

NHTSA Campaign Number: 80V109000
Vehicle/Equipment Make: INTERNATIONAL HARVESTER
Vehicle/Equipment Model: SCOUT SERIES
Model Year: 1980
Manufacturer Component Description: VISIBILITY:WINDSHIELD
Manufacturers Involved in Recall: INTERNATIONAL TRUCK & ENGINE CORPORATION
Manufacturered: 19780901 - 19791001
Type of Report: V (Vehicle, Equipment or Tire)
Potential Number of Units Affected: 44900
Date Owner Notified By Manufacturer: 19801013
Recall Initiated By: OVSC
Manufacturer Responsible For Recall: INTERNATIONAL HARVESTER
Report Received Date: 19800820
Record Creation Date: 19800826
Regulation Part Number: 571
Federal Motor Vehicle Safety Standard Number: 212

Defect Summary:

A NUMBER OF VEHICLES MAY NOT BE IN COMPLIANCE WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 212, "WINDSHIELD MOUNTING", AS A RESULT OF IMPROPER SEAL CLEANING OR ADHESIVE MISAPPLICATION.

Corrective Summary:

DEALER WILL REMOVE WINDSHIELD SEAL LOCK STRIP, CLEAN AND PRIME IT, AND ADD ADHESIVE AT NO CHARGE TO OWNER.

Notes:

VEHICLE DESCRIPTION: MULTIPURPOSE VEHICLES.SYSTEM: VISUAL; GLASS WINDSHIELD.CONSEQUENCES OF DEFECT: IN THE EVENT OF AN ACCIDENT THE WINDSHIELD MAY NOTREMAIN IN PLACE, THUS PASSENGERS MAY BE EJECTED FROM VEHICLE AND SEVERELYINJURED.

-

INTERNATIONAL HARVESTER: SCOUT SERIES: VISIBILITY:WINDSHIELD

NHTSA Campaign Number: 80V109000
Vehicle/Equipment Make: INTERNATIONAL HARVESTER
Vehicle/Equipment Model: SCOUT SERIES
Model Year: 1979
Manufacturer Component Description: VISIBILITY:WINDSHIELD
Manufacturers Involved in Recall: INTERNATIONAL TRUCK & ENGINE CORPORATION
Manufacturered: 19780901 - 19791001
Type of Report: V (Vehicle, Equipment or Tire)
Potential Number of Units Affected: 44900
Date Owner Notified By Manufacturer: 19801013
Recall Initiated By: OVSC
Manufacturer Responsible For Recall: INTERNATIONAL HARVESTER
Report Received Date: 19800820
Record Creation Date: 19800826
Regulation Part Number: 571
Federal Motor Vehicle Safety Standard Number: 212

Defect Summary:

A NUMBER OF VEHICLES MAY NOT BE IN COMPLIANCE WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 212, "WINDSHIELD MOUNTING", AS A RESULT OF IMPROPER SEAL CLEANING OR ADHESIVE MISAPPLICATION.

Corrective Summary:

DEALER WILL REMOVE WINDSHIELD SEAL LOCK STRIP, CLEAN AND PRIME IT, AND ADD ADHESIVE AT NO CHARGE TO OWNER.

Notes:

VEHICLE DESCRIPTION: MULTIPURPOSE VEHICLES.SYSTEM: VISUAL; GLASS WINDSHIELD.CONSEQUENCES OF DEFECT: IN THE EVENT OF AN ACCIDENT THE WINDSHIELD MAY NOTREMAIN IN PLACE, THUS PASSENGERS MAY BE EJECTED FROM VEHICLE AND SEVERELYINJURED.

-

INTERNATIONAL HARVESTER: SCOUT SERIES: ELECTRICAL SYSTEM:WIRING: REAR COMPARTMENT/TRUNK

NHTSA Campaign Number: 78V100000
Vehicle/Equipment Make: INTERNATIONAL HARVESTER
Vehicle/Equipment Model: SCOUT SERIES
Model Year: 1978
Manufacturer Component Description: ELECTRICAL SYSTEM:WIRING: REAR COMPARTMENT/TRUNK
Manufacturers Involved in Recall: INTERNATIONAL TRUCK & ENGINE CORPORATION
Manufacturered: 19760401 - 19780401
Type of Report: V (Vehicle, Equipment or Tire)
Potential Number of Units Affected: 20398
Date Owner Notified By Manufacturer: 19780609
Recall Initiated By: MFR
Manufacturer Responsible For Recall: INTERNATIONAL HARVESTER
Report Received Date: 19780503
Record Creation Date: 19791012

Defect Summary:

THE WIRING HARNESS MAY HAVE BEEN ENTRAPPED, OUT OF POSITION, IN A PINCHED CONDITION AT A FRAME OUTRIGGER DURING ASSEMBLY OF THE BODY CHASSIS. THE TRAILER FEED WIRE IS NOT PROTECTED BY A FUSE OR CIRCUIT AND IS SUSCEPTIBLE TO A SHORT CIRCUIT OCCURRENCE.

Corrective Summary:

THE DEALER WILL INSPECT VEHICLES FOR THIS PINCHED CONDITION, ADD CLIPPING TO ENSURE POSITIVE LOCATION OF WIRING HARNESS AND PROPER SEPARATION FROM FUEL LINE AT OUTRIGGER AND INSTALL A CIRCUIT BREAKER ON THE TRAILER FEED WIRE AT NO CHARGE.

Notes:

VEHICLE DESCRIPTION: LIGHT TRUCKS.SYSTEM: ELECTRICAL; WIRING HARNESS.CONSEQUENCES OF DEFECT: SHOULD THE TRAILER FEED WIRE SHORT OUT AT THEOUTRIGGER, THE RESULTANT HEAT CAN CAUSE A NEARBY FUEL LINE TO MELT, POTENTIALLYRESULTING IN A VEHICLE FIRE AND SUBSEQUENT PERSONAL INJURY.

-

INTERNATIONAL HARVESTER: SCOUT SERIES: FUEL SYSTEM, GASOLINE:DELIVERY

NHTSA Campaign Number: 79V050000
Vehicle/Equipment Make: INTERNATIONAL HARVESTER
Vehicle/Equipment Model: SCOUT SERIES
Model Year: 1978
Manufacturer Component Description: FUEL SYSTEM, GASOLINE:DELIVERY
Manufacturers Involved in Recall: INTERNATIONAL TRUCK & ENGINE CORPORATION
Manufacturered: 19771101 - 19771201
Type of Report: V (Vehicle, Equipment or Tire)
Potential Number of Units Affected: 4300
Date Owner Notified By Manufacturer: 19790328
Recall Initiated By: OVSC
Manufacturer Responsible For Recall: INTERNATIONAL HARVESTER
Report Received Date: 19790221
Record Creation Date: 19791012
Regulation Part Number: 571
Federal Motor Vehicle Safety Standard Number: 301

Defect Summary:

DUE TO INCORRECT CLIPPING OF THE FUEL LINE AT THE RIGHT FRONT INNER FENDER SPLASH PANEL, THE LINE COULD SEVER OR BECOME PARTIALLY CUT BY THE LOWER EDGE OF THE SPLASH PANEL, IN THE EVENT OF A VEHICLE IMPACT. THESE VEHICLES DO NOT CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 301, "FUEL SYSTEM INTEGRITY".

Corrective Summary:

DEALER WILL INSPECT FUEL LINE CLIPPING AND, IF NECESSARY, CLIP TO THE PROPER LOCATION.

Notes:

VEHICLE DESCRIPTION: TRUCKS.SYSTEM: FUEL; FUEL LINE.CONSEQUENCES OF DEFECT: LEAKING FUEL, RESULTING FROM A FRONTAL IMPACT, COULDLEAD TO A VEHICLE FIRE AND SERIOUS PERSONAL INJURY TO PASSENGERS.

-

INTERNATIONAL HARVESTER: SCOUT SERIES: ELECTRICAL SYSTEM:WIRING: REAR COMPARTMENT/TRUNK

NHTSA Campaign Number: 78V100000
Vehicle/Equipment Make: INTERNATIONAL HARVESTER
Vehicle/Equipment Model: SCOUT SERIES
Model Year: 1977
Manufacturer Component Description: ELECTRICAL SYSTEM:WIRING: REAR COMPARTMENT/TRUNK
Manufacturers Involved in Recall: INTERNATIONAL TRUCK & ENGINE CORPORATION
Manufacturered: 19760401 - 19780401
Type of Report: V (Vehicle, Equipment or Tire)
Potential Number of Units Affected: 20398
Date Owner Notified By Manufacturer: 19780609
Recall Initiated By: MFR
Manufacturer Responsible For Recall: INTERNATIONAL HARVESTER
Report Received Date: 19780503
Record Creation Date: 19791012

Defect Summary:

THE WIRING HARNESS MAY HAVE BEEN ENTRAPPED, OUT OF POSITION, IN A PINCHED CONDITION AT A FRAME OUTRIGGER DURING ASSEMBLY OF THE BODY CHASSIS. THE TRAILER FEED WIRE IS NOT PROTECTED BY A FUSE OR CIRCUIT AND IS SUSCEPTIBLE TO A SHORT CIRCUIT OCCURRENCE.

Corrective Summary:

THE DEALER WILL INSPECT VEHICLES FOR THIS PINCHED CONDITION, ADD CLIPPING TO ENSURE POSITIVE LOCATION OF WIRING HARNESS AND PROPER SEPARATION FROM FUEL LINE AT OUTRIGGER AND INSTALL A CIRCUIT BREAKER ON THE TRAILER FEED WIRE AT NO CHARGE.

Notes:

VEHICLE DESCRIPTION: LIGHT TRUCKS.SYSTEM: ELECTRICAL; WIRING HARNESS.CONSEQUENCES OF DEFECT: SHOULD THE TRAILER FEED WIRE SHORT OUT AT THEOUTRIGGER, THE RESULTANT HEAT CAN CAUSE A NEARBY FUEL LINE TO MELT, POTENTIALLYRESULTING IN A VEHICLE FIRE AND SUBSEQUENT PERSONAL INJURY.

-

INTERNATIONAL HARVESTER: SCOUT SERIES: ELECTRICAL SYSTEM:WIRING: REAR COMPARTMENT/TRUNK

NHTSA Campaign Number: 78V100000
Vehicle/Equipment Make: INTERNATIONAL HARVESTER
Vehicle/Equipment Model: SCOUT SERIES
Model Year: 1976
Manufacturer Component Description: ELECTRICAL SYSTEM:WIRING: REAR COMPARTMENT/TRUNK
Manufacturers Involved in Recall: INTERNATIONAL TRUCK & ENGINE CORPORATION
Manufacturered: 19760401 - 19780401
Type of Report: V (Vehicle, Equipment or Tire)
Potential Number of Units Affected: 20398
Date Owner Notified By Manufacturer: 19780609
Recall Initiated By: MFR
Manufacturer Responsible For Recall: INTERNATIONAL HARVESTER
Report Received Date: 19780503
Record Creation Date: 19791012

Defect Summary:

THE WIRING HARNESS MAY HAVE BEEN ENTRAPPED, OUT OF POSITION, IN A PINCHED CONDITION AT A FRAME OUTRIGGER DURING ASSEMBLY OF THE BODY CHASSIS. THE TRAILER FEED WIRE IS NOT PROTECTED BY A FUSE OR CIRCUIT AND IS SUSCEPTIBLE TO A SHORT CIRCUIT OCCURRENCE.

Corrective Summary:

THE DEALER WILL INSPECT VEHICLES FOR THIS PINCHED CONDITION, ADD CLIPPING TO ENSURE POSITIVE LOCATION OF WIRING HARNESS AND PROPER SEPARATION FROM FUEL LINE AT OUTRIGGER AND INSTALL A CIRCUIT BREAKER ON THE TRAILER FEED WIRE AT NO CHARGE.

Notes:

VEHICLE DESCRIPTION: LIGHT TRUCKS.SYSTEM: ELECTRICAL; WIRING HARNESS.CONSEQUENCES OF DEFECT: SHOULD THE TRAILER FEED WIRE SHORT OUT AT THEOUTRIGGER, THE RESULTANT HEAT CAN CAUSE A NEARBY FUEL LINE TO MELT, POTENTIALLYRESULTING IN A VEHICLE FIRE AND SUBSEQUENT PERSONAL INJURY.

-

INTERNATIONAL HARVESTER: SCOUT SERIES: STEERING:LINKAGES:KNUCKLE:SPINDLE:ARM

NHTSA Campaign Number: 74V221000
Vehicle/Equipment Make: NAVISTAR INTL CORP.
Vehicle/Equipment Model: SCOUT SERIES
Model Year: 1975
Manufacturer Component Description: STEERING:LINKAGES:KNUCKLE:SPINDLE:ARM
Manufacturers Involved in Recall: INTERNATIONAL TRUCK & ENGINE CORPORATION
Type of Report: V (Vehicle, Equipment or Tire)
Potential Number of Units Affected: 3000
Date Owner Notified By Manufacturer: 19741223
Recall Initiated By: MFR
Manufacturer Responsible For Recall: NAVISTAR INTL CORP.
Report Received Date: 19741115
Record Creation Date: 19791012

Notes:

INTERNATIONAL HARVESTER CAMPAIGN NO 74512.4X2 AND 4X4.POSSIBILITY THAT THEFRONT AXLE STEERING KNUCKLE MAY HAVE BEEN IMPROPERLY HEAT-TREATED.THISCONDITION COULD DECREASE EXPECTED LIFE OF KNUCKLE, AND IF FAILURE OCCURRED,STEERING KNUCKLE COULD BREAK AND RESULT IN LOSS OF STEERING.(CORRECT BYINSPECTING KNUCKLE AND REPLACING KNUCKLE WHERE NECESSARY).

-

INTERNATIONAL HARVESTER: SCOUT SERIES: STEERING:LINKAGES:KNUCKLE:SPINDLE:ARM

NHTSA Campaign Number: 74V221000
Vehicle/Equipment Make: NAVISTAR INTL CORP.
Vehicle/Equipment Model: SCOUT SERIES
Model Year: 1974
Manufacturer Component Description: STEERING:LINKAGES:KNUCKLE:SPINDLE:ARM
Manufacturers Involved in Recall: INTERNATIONAL TRUCK & ENGINE CORPORATION
Type of Report: V (Vehicle, Equipment or Tire)
Potential Number of Units Affected: 3000
Date Owner Notified By Manufacturer: 19741223
Recall Initiated By: MFR
Manufacturer Responsible For Recall: NAVISTAR INTL CORP.
Report Received Date: 19741115
Record Creation Date: 19791012

Notes:

INTERNATIONAL HARVESTER CAMPAIGN NO 74512.4X2 AND 4X4.POSSIBILITY THAT THEFRONT AXLE STEERING KNUCKLE MAY HAVE BEEN IMPROPERLY HEAT-TREATED.THISCONDITION COULD DECREASE EXPECTED LIFE OF KNUCKLE, AND IF FAILURE OCCURRED,STEERING KNUCKLE COULD BREAK AND RESULT IN LOSS OF STEERING.(CORRECT BYINSPECTING KNUCKLE AND REPLACING KNUCKLE WHERE NECESSARY).

-

INTERNATIONAL HARVESTER: SCOUT SERIES: FUEL SYSTEM, GASOLINE:CARBURETOR SYSTEM

NHTSA Campaign Number: 73V081000
Vehicle/Equipment Make: NAVISTAR INTL CORP.
Vehicle/Equipment Model: SCOUT SERIES
Model Year: 1973
Manufacturer Component Description: FUEL SYSTEM, GASOLINE:CARBURETOR SYSTEM
Manufacturers Involved in Recall: INTERNATIONAL TRUCK & ENGINE CORPORATION
Manufacturered: 19720701 - 19730301
Type of Report: V (Vehicle, Equipment or Tire)
Potential Number of Units Affected: 1500
Date Owner Notified By Manufacturer: 19730531
Recall Initiated By: MFR
Manufacturer Responsible For Recall: NAVISTAR INTL CORP.
Report Received Date: 19730410
Record Creation Date: 19791012

Notes:

INTERNATIONAL HARVESTER CAMPAIGN NO 73505.SCOUTS.POSSIBILITY THAT THECARBURETOR EQUIPPED WITH A FAST IDLE CAM THE SCREW THAT RETAINS THE FAST IDLECAM TO THE CARBURETOR MAY LOOSEN AND FALL OUT, CAUSING THE FAST IDLE CAM TODROP TO AN INTERFERENCE CONDITION WITH THE ACCELERATOR LINKAGE AT THECARBURETOR HOLDING THE LINKAGE PARTIALLY OPEN.(CORRECT BY INSPECTING ANDREPLACING EXISTING SCREW WITH SELF-LOCKING TYPE SCREW. )

-

INTERNATIONAL HARVESTER: SCOUT SERIES: SEATS:FRONT ASSEMBLY:RECLINER

NHTSA Campaign Number: 72V025000
Vehicle/Equipment Make: NAVISTAR INTL CORP.
Vehicle/Equipment Model: SCOUT SERIES
Model Year: 1972
Manufacturer Component Description: SEATS:FRONT ASSEMBLY:RECLINER
Manufacturers Involved in Recall: INTERNATIONAL TRUCK & ENGINE CORPORATION
Manufacturered: 19710401 - 19711101
Type of Report: V (Vehicle, Equipment or Tire)
Potential Number of Units Affected: 9000
Date Owner Notified By Manufacturer: 19720515
Recall Initiated By: MFR
Manufacturer Responsible For Recall: NAVISTAR INTL CORP.
Report Received Date: 19720101
Record Creation Date: 19791012

Notes:

CAMPAIGN NO 72005.POSSIBILITY THAT REAR SEAT, WHICH IS HINGED TO ALLOW IT TOBE FOLDED FORWARD, HAS ADJUSTABLE STOPS.IF STOPS ARE NOT PROPERLY ADJUSTEDSEAT WILL NOT LOCK AND, IN PANIC STOP, SEAT ASSEMBLY COULD FOLD FORWARD ONHINGE AND STRIKE BACK OF FRONT SEAT AND OCCUPANT.(CORRECT BY INSPECTING ANDSHORTENING CUSHION BUMPER STOP BOLTS TO PRECLUDE ANY POSSIBILITY OF SEAT NOTLOCKING.)

-

INTERNATIONAL HARVESTER: SCOUT SERIES: SEATS:FRONT ASSEMBLY:RECLINER

NHTSA Campaign Number: 72V025000
Vehicle/Equipment Make: NAVISTAR INTL CORP.
Vehicle/Equipment Model: SCOUT SERIES
Model Year: 1971
Manufacturer Component Description: SEATS:FRONT ASSEMBLY:RECLINER
Manufacturers Involved in Recall: INTERNATIONAL TRUCK & ENGINE CORPORATION
Manufacturered: 19710401 - 19711101
Type of Report: V (Vehicle, Equipment or Tire)
Potential Number of Units Affected: 9000
Date Owner Notified By Manufacturer: 19720515
Recall Initiated By: MFR
Manufacturer Responsible For Recall: NAVISTAR INTL CORP.
Report Received Date: 19720101
Record Creation Date: 19791012

Notes:

CAMPAIGN NO 72005.POSSIBILITY THAT REAR SEAT, WHICH IS HINGED TO ALLOW IT TOBE FOLDED FORWARD, HAS ADJUSTABLE STOPS.IF STOPS ARE NOT PROPERLY ADJUSTEDSEAT WILL NOT LOCK AND, IN PANIC STOP, SEAT ASSEMBLY COULD FOLD FORWARD ONHINGE AND STRIKE BACK OF FRONT SEAT AND OCCUPANT.(CORRECT BY INSPECTING ANDSHORTENING CUSHION BUMPER STOP BOLTS TO PRECLUDE ANY POSSIBILITY OF SEAT NOTLOCKING.)

-



POPULAR CATEGORIES