EXTERIOR
INTERIOR
LIGHTS
PERFORMANCE
SUSPENSION
BRAKES
DRIVETRAIN
AUDIO
WHEELS
GARAGE

 Select Your Vehicle


Pyle 3000 Watts 4 Channel Bridgeable Amplifier

$164.17
For each

Part#: PLAM3000


  Pyle 3000 Watts 4 Channel Bridgeable Amplifier
 




PRODUCT DETAILS
Fits On:

All Jeeps (Universal), All Vehicles (Universal)


Description:
Four Channel Bridgeable Amplification
Tri-way Configuration:4/3/2 Channels
4 X 750 Watts Total Output @ 4 Ohms
3000 Watts Total System Output @ 4 Ohms
Variable Gain Control
MOSFET Pulse Width Modulated Power Supply
2 Ohm Stereo Stable
Built-In Variable Subwoofer Crossover
High Level Low Impedance MOLEX Input Connector
RCA Low Level Inputs
Speaker Output Terminal Strip
Signal/Noise Ratio 90dB
THD Less Than 0.04%
Frequency Response:15Hz-30kHz
Overload Protection
Thermal Protection
Short Circuit Protection
Power On LED Indicator
LED Diagnostic Condition Indicator
Automotive Type Fuse Protection
Dimensions:14.17"L 9.76"W 2.26"H
DOWNLOADS
ABOUT PYLE
Pyle made a name for themselves in the 1960s building high-end subwoofers. Their original Pyle Driver speaker was a mainstay in households for several decades. Since then they have expanded their lineup to include a huge range of audio and electronic entertainment products from speakers to DVD players. Based in Brooklyn, NY Pyle has always been proud of its excellent customer service. They also take pride in the fact that they are able to offer high-quality products at very reasonable prices for those who are on a tight budget. Born out of good old American ingenuity, Pyle driver has grown to become a strong presence in the electronic entertainment world.
FAQs
Q: How Many Channels Should My Amp Have?
A: Choosing the right amplifier is an important part of building your car audio system. Choosing the right number of channels for your amplifier is determined by the number of speakers (tweeters, mid-range and sub-woofers) you are planning to run. In most cases you want to run one speaker per channel. Although it is possible to run multiple speakers off of the same channel it is not usually recommended since it wouldn't optimize sound quality. In general, sub-woofers require more power than smaller speakers so in many cases they will require their own dedicated amplifier.

Here is an example of possible set-ups: If you have a vehicle with four mid-range speakers and a sub-woofer you know will need one channel per speaker for all five speakers. You can either run a five channel amplifier with a dedicated sub-woofer channel in it, or you can use a four channel amplifier for the mid-range speakers and a separate mono or two channel amp for the sub-woofer. The latter option will provide the cleanest sound and allow your subwoofer to get all the power it can use, but either option will work.

Q: How many watts should I make sure my amplifier can handle? How do I know which wattage is best for me?
A: Matching your amplifier's power with your speakers is of utmost importance to a good sounding stereo system. If you are planning on running large subwoofers for added bass you should know that subs need a lot more power (around four times more) than the other component speakers in your system. There is no set amount of power that is best for a car stereo system but usually the more power you can run, the richer and fuller the sound quality will be from the system. The most important thing is to match the amp to the speakers you are using. If you are going to run four mid-range speakers and they can handle 50 watts a piece then you'll want an amp that can supply close to 50 watts per channel. In that same system you may run a subwoofer that can handle 200 watts, in which case you will need an amp that can supply at least 150 watts to the sub.

See all 7 questions & answers
POPULAR CATEGORIES
Exhaust Systems
Exhaust Systems
Cold Air Intakes
Projector Headlights
Euro Tail Lights
Body Kits
Hoods
Shocks
Racing Seats
Audio Sitemap