Select Your Vehicle

Pyle Dryver 3600 Watt Mono Block Mosfet Digital Amplifier

For each

Part#: PLAD3300D

  Pyle Dryver 3600 Watt Mono Block Mosfet Digital Amplifier

Fits On:

All Jeeps (Universal), All Vehicles (Universal)

1 x 600W RMS @ 4 Ohms
1 x 1800W MAX @ 2 Ohms
1 x 3600W MAX @ 1.3 Ohms
Mono Block Subwoofer Amplifier
1 Ohm Stereo Stable
MOSFET Power Supply
PWM (Pulse-Width-Modulated) System
Double Sided Epoxy PCB Circuit Board
Gold Plated RCA Inputs
Custom Terminal Block for Speaker Connections
Thermal, Overload Short Protection
Variable Low pass Filter (50Hz~150Hz,24dB/Octave)
Variable Subsonic Filter (15Hz~40Hz,24dB/Octave)
Phase Control 0-180 Degree
Remote Bass Level Control (Included)
Input Impedance:10K Ohms
Soft Turn-on/Turn-off
Side Leg Mounting
Red Lighting Illumination
THD: 0.1%.
S/N Ratio: 90dB
Input Sensitivity : 200mV ~8V
Freq. Response : 15Hz ~ 150KHz
Patent Pending
Heavy Duty Power Coated Heatsink
Dimensions : 8.6"(W) x 2.27"(H) x 15"(L)
Pyle made a name for themselves in the 1960s building high-end subwoofers. Their original Pyle Driver speaker was a mainstay in households for several decades. Since then they have expanded their lineup to include a huge range of audio and electronic entertainment products from speakers to DVD players. Based in Brooklyn, NY Pyle has always been proud of its excellent customer service. They also take pride in the fact that they are able to offer high-quality products at very reasonable prices for those who are on a tight budget. Born out of good old American ingenuity, Pyle driver has grown to become a strong presence in the electronic entertainment world.
Q: Why should I buy an amp? What is the benefit?
A: If you want to upgrade your stock stereo system for better sound quality and a little more kick, an amplifier will be a crucial component in your new setup. Amplifiers do just what they advertise; they boost the output of low power sound signals coming out of the stereo allowing you to use higher-quality, more powerful speakers which will give your stereo better sound and increased volume. If you run high-power speakers and subwoofers without an amplifier the results will be a terrible sounding stereo system and a lot of wasted potential in your nice speakers. But add the right amplifier to the mix and suddenly your stereo will be powerful and crisp.

Q: How many watts should I make sure my amplifier can handle? How do I know which wattage is best for me?
A: Matching your amplifier's power with your speakers is of utmost importance to a good sounding stereo system. If you are planning on running large subwoofers for added bass you should know that subs need a lot more power (around four times more) than the other component speakers in your system. There is no set amount of power that is best for a car stereo system but usually the more power you can run, the richer and fuller the sound quality will be from the system. The most important thing is to match the amp to the speakers you are using. If you are going to run four mid-range speakers and they can handle 50 watts a piece then you'll want an amp that can supply close to 50 watts per channel. In that same system you may run a subwoofer that can handle 200 watts, in which case you will need an amp that can supply at least 150 watts to the sub.

See all 7 questions & answers
Exhaust Systems
Exhaust Systems
Cold Air Intakes
Projector Headlights
Euro Tail Lights
Body Kits
Racing Seats
Audio Sitemap