Select Your Vehicle

Motul 1L - 8100 5W40 X-Clean C3 - 502 00, 505 00 - LL04 - 229.31 - Porsche

For each

Part#: 841611

  Motul 1L - 8100 5W40 X-Clean C3 - 502 00, 505 00 - LL04 - 229.31 - Porsche

Fits On:


Motul 1L - 8100 5W40 X-Clean C3 - 502 00, 505 00 - LL04 - 229.31 - Porsche TYPEOFUSE 8100 X-clean 5W-40 ACEA C3 Gasoline & Diesel lubricant for Euro IV engines 100% Synthetic Lubricant specially designed for last generation cars, powered by turbo Diesel direct injection or gasoline engines, EURO IV emission regulation compliant, requiring an ACEA C3 engine oil, high HTHS (> 3.5 mPa.s) viscosity and "Mid SAPS" with reduced content of suphated ash (= 0.8%), phosphorus (0.07 = x = 0.09%) and sulphur (= 0.3%). Suitable for any type of Diesel or gasoline engines calling for ACEA A3/B3 or A3/B4 lubricants. ATTENTION : For BMW vehicles, this product can be used for gasoline engines only in European Union countries, Switzerland, Norway and Liechtenstein. Refer to BMW recommendation. Do not use for engines from VW group fitted with DPF when VW 507 00 is required. PERFORMANCES STANDARDS APPROVALS RECOMMENDATIONS ACEAA3 / B4 / C3 API SM / CF, BMW Long Life 04, Ford WSS M2C 917A, MB-Approval229.31&229.51, Porsche, VW50200–50500–50501 Renault RN0710 – RN0700 Nissan – Fiat – Kia/Hyundai – Suzuki – Ssangyong..Engines compliant with EURO IV emission regulation are fitted with sensitive exhaust gas after treatment systems : - Sulphur and Phosphorus inhibit catalytic convertors operation and can damage catalytic components : inefficient exhaust gas treatment. - Sulfated Ashes clog diesel particulate filters : shorten regenerating cycle, higher fuel consumption and engine power loss. ACEA developed ACEA C3 standard for lubricants with high HTHS (> 3.5 mPa.s), reduced Sulphated Ash, Phosphorus and Sulphur content (Mid SAPS), suitable for use with exhaust gas after treatment systems. ACEA C3 lubricants achieve extended drain intervals managed by vehicles computer on board. RECOMENDATIONS Drain interval : according to manufacturers'recommendations and tune to your own use. Do not mix with lubricants not ACEA C3 compliants. PROPERTIES Viscosity grade Density at 20°C (68°F) Viscosity at 40°C (104°F) Viscosity at 100°C (212°F) Viscosity HTHS at 150°C (302°F) Viscosity index Pour point Flash point Sulfated ash TBN SAE J 300 ASTM D1298 ASTM D445 ASTM D445 ASTM D4741 ASTM D2270 ASTM D97 ASTM D92 ASTM D874 ASTM D2896 5W-40 0,845 84.7 mm2/s 14.1 mm2/s 3.64 mPa.s 172 -39°C / -38°F 234°C / 453°F 0.80% weight 7.5 mg KOH/g
Have a question about this product? Click here to email us!

Exhaust Systems
Exhaust Systems
Cold Air Intakes
Projector Headlights
Euro Tail Lights
Body Kits
Racing Seats
Performance Sitemap