EXTERIOR
INTERIOR
LIGHTS
PERFORMANCE
SUSPENSION
BRAKES
DRIVETRAIN
AUDIO
WHEELS
GARAGE
 Select Your Vehicle

GenRight Hi-Steer CrMo Tie Rod & Drag Link Kit (3/4" Bolts)

  GenRight Hi-Steer CrMo Tie Rod & Drag Link Kit (3/4
 

$699.99
For kit

Part#: STK-8750

Extension Type : Adjustable Drag Links



 Select Your Vehicle


GenRight Hi-Steer CrMo Tie Rod & Drag Link Kit (3/4" Bolts)

$699.99
For kit

Part#: STK-8750

Extension Type : Adjustable Drag Links


  GenRight Hi-Steer CrMo Tie Rod & Drag Link Kit (3/4
 





PRODUCT DETAILS
Fits On:

All Jeeps (Universal)


Description:
This is the GenRight "builders" steering (Drag Link and Tie Rod) kit. It is a perfect compliment to their Front 3 Link suspension kit and can be cut to fit any vehicle (including a Jeep TJ, LJ, CJ or YJ) or axle width and works best with hi-steer type knuckles. This kit is made up of the best component parts you can buy for on-road OR off-road use! This Heavy Duty kit will hold up to big tires and off-road abuse. Got a hydraulic ram? It will work with that too.

GenRight kit includes:
•(1) Thick wall 1-3/8" diameter Heat Treated CrMoly Tubing (for the tie rod)
•(1) Thick wall 1-3/8" diameter DOM Tubing (for the drag link)
•(4) Heavy Duty 7/8" diameter threaded shank FK CrMoly Heim rod ends and jam nuts
•(4) Left & Right hand threaded tube inserts (for easy adjustment)
•(8) CNC Machined stainless steel safety washers (for the top and bottom of each rod end)
•(4) Heavy Duty 3/4" Grade 8 mounting hardware

Why Heim rod ends? GenRight prefer the heims over the standard or heavy duty "tapered style" tie rod ends because, over the years they have seen the taper on the tie rod end SPLIT too many steel knuckles! This is the exact same steering set up they have used on their GenRight rigs for years, and it works great!

Important NOTES:
•Cutting & Welding is required: This kit requires cutting the tubing to length (tailoring it to your specific vehicle) and welding the threaded inserts onto the end of the Drag Link and Tie Rod.
•This kit may also require pressing out the ball joints to remove them from the stock knuckles, so you'll need a ball joint press if you are a do-it-yourselfer.
•This kit is offered in (2) sizes 3/4" for Dana 60 axle knuckles and 5/8" for Dana 44's & 30 knuckles. If necessary please order the smaller 5/8" GenRight CrMo Hi-Steer Kit (STK-8625)
•To install this GenRight CrMo Hi-Steer Kit it will require drilling the taper out of the knuckle with a 3/4" diameter drill.
•This kit requires moving the axle side trac bar mounting location to match the new higher drag link position!!!
•Once Installed, you MUST cycle the front suspension and steering (in all possible direction combinations) to make sure the ball joints or heims DO NOT exceed their range of motion which would damage the steering components and could cause a failure resulting in a loss of steering control!
FAQs
Q: What are strut extensions? Why buy them?
A: Strut extensions are spacers that mount between the top of your strut and your chassis to give a little boost in ride height to your vehicle. Usually made of aluminum, steel, or hardened urethane, these spacers are available in a host of different thicknesses so that you can easily adjust your ride height to a setting that is ideal for your driving needs. If your springs have sagged over the years, instead of spending a lot of time and money to swap out the springs, a set of strut extensions will allow you to restore your ride height without ever having to remove your springs from your struts. In addition if you are looking for a simple way to gain some lift in order to clear larger tires or run on dirt roads, strut spacers are perhaps the cheapest and most convenient option available for strut equipped vehicles.

Have a question about this product? Click here to email us!

POPULAR CATEGORIES
Exhaust Systems
Exhaust Systems
Cold Air Intakes
Projector Headlights
Euro Tail Lights
Body Kits
Hoods
Shocks
Racing Seats
Suspension Sitemap