Select Your Vehicle

Audiobahn 2400W 2-Channel High Current Car Amplifier

For each

Part#: A2300HCJ

  Audiobahn 2400W 2-Channel High Current Car Amplifier

Fits On:

All Jeeps (Universal), All Vehicles (Universal)


• 2-Channel Class AB High Current Car Amplifier

• RMS Power Rating:
• 4 ohms (Stereo): 450 watts x 2 chan.
• 2 ohms (Stereo): 700 watts x 2 chan.
• 1 ohm (Stereo): 1000 watts x 2 chan.
• 4 ohm (Mono): 600 watts x 1 chan.
• 2 ohm (Mono): 1200 watts x 1 chan.
• 1 ohm (Mono): 2400 watts x 1 chan.

• PWM MOSFET power supply
• Large display volt meter with blue illumination
• Variable Bass Boost (0-18 dB)
• High gloss chrome-plated finish
• 2-Channel operation
• Throughput RCA connections
• Cobalt blue illumination
• Double-Sided glass epoxy circuit board
• Dual cooling fans help to maintain its optimum operating temperature
• Chrome flame fan grilles for an enhanced appearance
• 4-Way Protection Circuitry: Thermal, Short Circuit, Overload , and DC Offset
• Heavy duty aluminum alloy heatsink for extreme heat dissipation
• Nickel-Plated RCA level inputs
• Nickel-Plated block terminals
• Input Sensitivity: 200mV-8V
• Variable Low-Pass Filter (30-120 Hz, 24 dB/octave)
• Variable High-Pass Filter (50-750 Hz, 24 dB/octave)
• Subsonic Filter (20-45 Hz)
• Frequency Response: 10-20,000 Hz
• Signal-To-Noise Ratio: >100 dB
• Dimensions: 25-5/8"L x 11-15/16"W x 2-1/2"H
Located in Buena Park, California, Audiobahn started out over a decade ago selling high-power audio equipment to the ever growing aftermarket community. Today they are a true one-stop-shopping brand for any and all mobile audio and electronics needs. With a strong focus on value they offer great affordable equipment that does not sacrifice quality in order to keep prices down. They continue to develop new products with innovative designs and creative aesthetics to keep on the cutting edge of the industry. With a passionate and knowledgeable staff they also provide superb service that has earned them a loyal following amongst audio enthusiasts.
Q: What is a Mono-Block Amplifier?
A: A Mono-Block amplifier is a two channel amplifier, but unlike many stereo amps the two channels are separated into two different systems. The main benefit of this type of setup is that it helps to eliminate cross talk or interference between the two channels, allowing for better sound quality. Mono-Block amps also operate with greater efficiency than most stereo amps. The biggest down side of a Mono-Block is that they cost nearly twice as much as an equivalent stereo amp, so you'll have to decide for yourself if the extra cost is worth it for a sound that is not interfered with and perfectly clean.

Q: How many watts should I make sure my amplifier can handle? How do I know which wattage is best for me?
A: Matching your amplifier's power with your speakers is of utmost importance to a good sounding stereo system. If you are planning on running large subwoofers for added bass you should know that subs need a lot more power (around four times more) than the other component speakers in your system. There is no set amount of power that is best for a car stereo system but usually the more power you can run, the richer and fuller the sound quality will be from the system. The most important thing is to match the amp to the speakers you are using. If you are going to run four mid-range speakers and they can handle 50 watts a piece then you'll want an amp that can supply close to 50 watts per channel. In that same system you may run a subwoofer that can handle 200 watts, in which case you will need an amp that can supply at least 150 watts to the sub.

See all 7 questions & answers
Exhaust Systems
Exhaust Systems
Cold Air Intakes
Projector Headlights
Euro Tail Lights
Body Kits
Racing Seats
Audio Sitemap