Customer Support
Learning Center
Checkout
Welcome to the Toyota Mr2 Hoods Center at Andy's Auto Sport!
At Andy's Auto Sport, we have a huge variety of Toyota Mr2 hoods to ensure that you have every hood option available to you. We go out of our way to carry every major line of Toyota Mr2 hoods, so that whether you are looking for a cowl induction Toyota Mr2 hood or fiberglass ram air hood or anything in between, we've got it for you. Andy's Auto Sport is the ultimate shopping destination for your Toyota Mr2 hood needs!
» CHOOSE YOUR MODEL
» DID YOU KNOW?
A lot of times we get asked if a particular Mr2 hood we sell (Ram Air hood or Cowl hood, for example) is a "functional hood". By functional, the customer is asking whether the hood is going to add horsepower to their vehicle by directing the incoming airflow to the vehicle's airbox.
The answer is this: Most of the vented hoods on the market are not functional. They have the scoop built into the hood, and it's normally an open scoop that indeed lets air into the engine bay, but most of these hoods do not come with the ducting that is needed to control that incoming airflow and get it to the most "functional" place to generate more horsepower. That being said, there might be a small positive effect by simply letting more cool air into the engine bay, even if it isn't directed...
There are a few companies who do in fact make functional hoods. Suncoast Creations, for example, is a company who makes functional ram air hoods that come complete with the intake ducting to integrate with the hood.
We also sometimes get asked by a customer if he or she can put on a functional ram air hood and work that in conjunction with an air intake. The answer is no, because the ducting/filter that will be integrated with the hood will be clamped directly to the location of the airbox, thereby eliminating the possibility of running another intake. Basically, the ducting and filter that integrate with the hood is an intake system itself.
One thing to be aware of as you shop for any Mr2 hood is that aftermarket Mr2 hoods are generally either sold as bolt-on hoods or pin-on hoods (aka lift-off hoods). The bolt-on Mr2 hoods have a skin and a skeleton (a top and a bottom), and opened and closed using the factory latch. Pin-on Mr2 hoods are generally only comprised of a hood skin (just the top), are held down using pins, and have to be lifted off to be opened since they don't utilitze the factory latch mechanism. The reason a person might want to buy a pin-on hood is that it is substantially lighter than a bolt-on hood.
The answer is this: Most of the vented hoods on the market are not functional. They have the scoop built into the hood, and it's normally an open scoop that indeed lets air into the engine bay, but most of these hoods do not come with the ducting that is needed to control that incoming airflow and get it to the most "functional" place to generate more horsepower. That being said, there might be a small positive effect by simply letting more cool air into the engine bay, even if it isn't directed...
There are a few companies who do in fact make functional hoods. Suncoast Creations, for example, is a company who makes functional ram air hoods that come complete with the intake ducting to integrate with the hood.
We also sometimes get asked by a customer if he or she can put on a functional ram air hood and work that in conjunction with an air intake. The answer is no, because the ducting/filter that will be integrated with the hood will be clamped directly to the location of the airbox, thereby eliminating the possibility of running another intake. Basically, the ducting and filter that integrate with the hood is an intake system itself.
One thing to be aware of as you shop for any Mr2 hood is that aftermarket Mr2 hoods are generally either sold as bolt-on hoods or pin-on hoods (aka lift-off hoods). The bolt-on Mr2 hoods have a skin and a skeleton (a top and a bottom), and opened and closed using the factory latch. Pin-on Mr2 hoods are generally only comprised of a hood skin (just the top), are held down using pins, and have to be lifted off to be opened since they don't utilitze the factory latch mechanism. The reason a person might want to buy a pin-on hood is that it is substantially lighter than a bolt-on hood.
» MODEL YEARS COVERED
1985 Mr2
1986 Mr2
1987 Mr2
1988 Mr2
1989 Mr2
1990 Mr2
1991 Mr2
1992 Mr2
1993 Mr2
1994 Mr2
1995 Mr2
» AVAILABLE BRANDS
» POPULAR STYLES
Mr2 Cowl Hood
Mr2 Carbon Fiber Hoods
Mr2 Sheet Metal Hoods
Mr2 Ram Air Hood
Mr2 Cobra Hood
Mr2 Fiberglass Hoods
Mr2 SS Hoods
Mr2 Functional Hoods
Mr2 Razor Hoods
Mr2 steel hood
Mr2 steel hoods
Mr2 cowl induction hood
Mr2 cowl induction performance
» SITE CENTERS
» LINKS
» POWERED BY
