Customer Support
Learning Center
Checkout
Goodmark Rear Roll Pan W/ Center Tag Pocket
part# 4146-876-882C
Price: $109.95
Sale Price: $107.75 / Each
Sale Price: $107.75 / Each
Description
Fits On:
88 R20 Pickup
88 R30 Pickup
88 V30 Pickup
88-00 C2500 Pickup
88-00 C3500 Pickup
88-00 K2500 Pickup
88-00 K3500 Pickup
88-99 C1500 Pickup
88-99 K1500 Pickup
89 R2500 Pickup
89-91 R3500 Pickup
89-91 V3500 Pickup
88 R30 Pickup
88 V30 Pickup
88-00 C2500 Pickup
88-00 C3500 Pickup
88-00 K2500 Pickup
88-00 K3500 Pickup
88-99 C1500 Pickup
88-99 K1500 Pickup
89 R2500 Pickup
89-91 R3500 Pickup
89-91 V3500 Pickup
About this Manufacturer:
Goodmark specializes in making sheet metal and trim. They have been around since the 1980s, and they are a leader in providing restoration products. They make a habit of re-tooling all their parts very regularly to ensure that they continue to offer the highest quality of sheet metal and trim available.
About this Product:
Rollpan
Rear
w/Rear Tag Centered
Rear (On Pickup Models)
Rear
w/Rear Tag Centered
Rear (On Pickup Models)
Frequently Asked Questions
What is a roll pan? Why buy a roll pan?
A roll pan is a rear "fascia" many truck owners buy to replace that factory metal rear bumper. The roll pan gives a truck a much more custom, clean look as compared to the bulky factory metal bumper. Of course, by replacing the factory bumper with a roll pan, you lose the functionality of using the bumper as a step.
How do you install a roll pan?
According to Wiki Answers: "You will need to take off the tailgate by first disconnecting the tailgate support cables on either side. You can usually half-open the tailgate and one side will be able to slide up and off. (See repair or owners manual for proper removal on your vehicle). Now that the tailgate is off, disconnect all wiring leading to rear bumper for license plate light, tow packages, etc. Next, remove rear bumper via the brackets attached at the frame (usually 3 or 4 bolts). This will completely remove your stock rear bumper. After completing those removal steps: With tailgate off, set roll pan into desired position making sure everything looks square to the sides and bottom. (Note: pulling or pushing of the bed corners is sometimes necessary for proper fit). Using duct tape, attach roll pan and reinstall tailgate to ensure clearance when tailgate is in operation. Adjust roll pan as necessary to obtain proper clearance and desired look. FINALLY bolt roll pan into place using supplied screws (or weld for steel roll pans if desired). Reinstall the tailgate and you are done!"
A roll pan is a rear "fascia" many truck owners buy to replace that factory metal rear bumper. The roll pan gives a truck a much more custom, clean look as compared to the bulky factory metal bumper. Of course, by replacing the factory bumper with a roll pan, you lose the functionality of using the bumper as a step.
How do you install a roll pan?
According to Wiki Answers: "You will need to take off the tailgate by first disconnecting the tailgate support cables on either side. You can usually half-open the tailgate and one side will be able to slide up and off. (See repair or owners manual for proper removal on your vehicle). Now that the tailgate is off, disconnect all wiring leading to rear bumper for license plate light, tow packages, etc. Next, remove rear bumper via the brackets attached at the frame (usually 3 or 4 bolts). This will completely remove your stock rear bumper. After completing those removal steps: With tailgate off, set roll pan into desired position making sure everything looks square to the sides and bottom. (Note: pulling or pushing of the bed corners is sometimes necessary for proper fit). Using duct tape, attach roll pan and reinstall tailgate to ensure clearance when tailgate is in operation. Adjust roll pan as necessary to obtain proper clearance and desired look. FINALLY bolt roll pan into place using supplied screws (or weld for steel roll pans if desired). Reinstall the tailgate and you are done!"
» SITE CENTERS
» LINKS
» POWERED BY
