Customer Support
Learning Center
Checkout
FBI Roll Pans at Andy's Auto Sport
4 items available
Roll Pans
Fits on:
73-91 Chevrolet FS Blazer
73-91 Chevrolet FS Blazer
|
RP108.BC
|
$119.95 /Each
|
Fits on:
92-00 Chevrolet Blazer FS
92-00 Chevrolet Blazer FS
|
RP105.BC
|
$119.95 /Each
|
Fits on:
73-91 Chevrolet FS Blazer
73-91 Chevrolet FS Blazer
|
RP108
|
$89.95 /Each
|
Fits on:
92-00 Chevrolet Blazer FS
92-00 Chevrolet Blazer FS
|
RP105
|
$89.95 /Each
|
About this Manufacturer:
It's not often that a fender bender is a good thing, but it is when you're talking about Fender Bender International! FBI makes lots of trick laser-cut metal products for your project, including roll pans, grilles and grille inserts, custom bumpers, and even taillight fillers. The company also offers many other cool accessories such as custom rearview mirrors and other billet aluminum parts, and is often the first to market with items for newly introduced vehicles. The folks at FBI are fellow car and truck enthusiasts as well, so they know what's up when it comes to making a ride stand out.
Frequently Asked Questions
What is a roll pan? Why buy a roll pan?
A roll pan is a rear "fascia" many truck owners buy to replace that factory metal rear bumper. The roll pan gives a truck a much more custom, clean look as compared to the bulky factory metal bumper. Of course, by replacing the factory bumper with a roll pan, you lose the functionality of using the bumper as a step.
How do you install a roll pan?
According to Wiki Answers: "You will need to take off the tailgate by first disconnecting the tailgate support cables on either side. You can usually half-open the tailgate and one side will be able to slide up and off. (See repair or owners manual for proper removal on your vehicle). Now that the tailgate is off, disconnect all wiring leading to rear bumper for license plate light, tow packages, etc. Next, remove rear bumper via the brackets attached at the frame (usually 3 or 4 bolts). This will completely remove your stock rear bumper. After completing those removal steps: With tailgate off, set roll pan into desired position making sure everything looks square to the sides and bottom. (Note: pulling or pushing of the bed corners is sometimes necessary for proper fit). Using duct tape, attach roll pan and reinstall tailgate to ensure clearance when tailgate is in operation. Adjust roll pan as necessary to obtain proper clearance and desired look. FINALLY bolt roll pan into place using supplied screws (or weld for steel roll pans if desired). Reinstall the tailgate and you are done!"
A roll pan is a rear "fascia" many truck owners buy to replace that factory metal rear bumper. The roll pan gives a truck a much more custom, clean look as compared to the bulky factory metal bumper. Of course, by replacing the factory bumper with a roll pan, you lose the functionality of using the bumper as a step.
How do you install a roll pan?
According to Wiki Answers: "You will need to take off the tailgate by first disconnecting the tailgate support cables on either side. You can usually half-open the tailgate and one side will be able to slide up and off. (See repair or owners manual for proper removal on your vehicle). Now that the tailgate is off, disconnect all wiring leading to rear bumper for license plate light, tow packages, etc. Next, remove rear bumper via the brackets attached at the frame (usually 3 or 4 bolts). This will completely remove your stock rear bumper. After completing those removal steps: With tailgate off, set roll pan into desired position making sure everything looks square to the sides and bottom. (Note: pulling or pushing of the bed corners is sometimes necessary for proper fit). Using duct tape, attach roll pan and reinstall tailgate to ensure clearance when tailgate is in operation. Adjust roll pan as necessary to obtain proper clearance and desired look. FINALLY bolt roll pan into place using supplied screws (or weld for steel roll pans if desired). Reinstall the tailgate and you are done!"
» SITE CENTERS
» LINKS
» POWERED BY
